briquetting plant 06 260

saudi arabia customer sent us an inqury of iron powder briquette press machine-case-henan shisheng mining machinery co.,ltd

At August 10, 2015, one customer from Saudi Arabia sent us an inqury about iron powder briquette press machine, the content is the following: "Dear Sir or Ms. We are a Ferro Alloys Producer and generate around 500 Tons of fumes per month. We also have at least 50,000 Tons of fumes in storage. We would like quote for a briquetting machine that would be able to cleanly and eeficiently briquet these fumes at a rate of at least 15 tons per hour. our fumes are very fine (70 micron) as they are collected from our baghouse. please be sure to advise what kind of binder you would recommend and the approximate cost per ton of briquetts produced. We may also wnat to addsome metal fines as well as coal dust and Mn Ore dust to the fumes for briquetting. Looking forward to hearing from you, Best regards, Mahdi" Through communication between our salemen and him, we knew that he want to process ferro alloys powder, ie. to process iron powder. Our company is the professional briquetting machine manufacturer in China, our factory can custom ball press machine for customers according to customers' different need and requirement. Ferro alloys powder briquetting machine, also called iron powder briquetting machine, can be used to suppress coal dust, iron, coal, aluminum, iron, iron oxide, carbon powder, charcoal powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke and other various kinds of powder, powder materials, waste, waste, widely used in refractories, power plant, metallurgy, chemical industry, energy, transport, heating and other industries, by iron briquetting machine production of molding material, energy saving and environmental protection, convenient transportation, improve the utilization of the waste material, and has good economic benefit and social benefit. Working methods of the iron powder ball press machine: 1. the size of iron powder can be in 90-260 mesh. 2. iron powder is not allowed to have high hardness impurities. Otherwise will damage the roll surface. 3. powder briquetting machine's feeding must be uniform, timely, appropriate use of spiral feeder speed; 4. observe the iron powder briquette press machine returning material, adjust the supply of new material. Iron powder briquetting machine technical parameter: Model KFXM-360 KFXM-400 KFXM-500 KFXM-650 KFXM-750 KFXM-850 KFXM-1000 Capacity 4 t/h 8t/h 11t/h 18t/h 25t/h 35t/h 40 t/h Roll width 250mm 280mm 300mm 336mm 400mm 500mm 650mm Roll diameter 360mm 400mm 500mm 650mm 750mm 850mm 1000mm Power 7.5 kw 11-15kw 18.5-22kw 20-30kw 45kw 75kw 130kw Spindle speed 18 r/min 15r/min 13r/min 13r/min 13r/min 10r/min 10r/min balls size user defined user defined user defined user defined user defined user defined user defined This pictures are scene photographed by our salemen: More: Matters need attention in the process of iron powder briquetting machine

We are a Ferro Alloys Producer and generate around 500 Tons of fumes per month. We also have at least 50,000 Tons of fumes in storage. We would like quote for a briquetting machine that would be able to cleanly and eeficiently briquet these fumes at a rate of at least 15 tons per hour. our fumes are very fine (70 micron) as they are collected from our baghouse. please be sure to advise what kind of binder you would recommend and the approximate cost per ton of briquetts produced.

Through communication between our salemen and him, we knew that he want to process ferro alloys powder, ie. to process iron powder. Our company is the professional briquetting machine manufacturer in China, our factory can custom ball press machine for customers according to customers' different need and requirement.

Ferro alloys powder briquetting machine, also called iron powder briquetting machine, can be used to suppress coal dust, iron, coal, aluminum, iron, iron oxide, carbon powder, charcoal powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke and other various kinds of powder, powder materials, waste, waste, widely used in refractories, power plant, metallurgy, chemical industry, energy, transport, heating and other industries, by iron briquetting machine production of molding material, energy saving and environmental protection, convenient transportation, improve the utilization of the waste material, and has good economic benefit and social benefit.

mesh belt dryer for drying finished briquette in briquetting plant

Mesh belt dryer is a batch type, continuously working drying equipment. Mesh belt dryer is usually used to dry various briquettes, such as coal briquette, mineral powder briquette, iron powder briquette, fluorite powder briquette. Moisture content after drying could reach 5% below (moisture content is adjustable by the control system). It is widely used and an important equipment in briquette production line. Also, we could use mesh belt dryer of stainless steel to dry cassava chips, fruits, vegetables, medicine, food, etc. Mesh belt dryer has features with high efficiency, high capacity, high evaporation strength, standardized production. We could increase the segment according to the capacity. Mesh belt dryer has a high efficiency for the materials that request low moisture content. We could supply customization service according to the client request. The main heating mode is electric heating, steam heating, hot air heating, Materials that are processed by mesh belt dryer are easy to store and transport. Mesh belt dryer is energy-saving and environment-protecting equipment that creates a good economic benefit and social benefit.

Mesh belt type drying machine main principle is the material evenly tiled on the mesh belt, is driven by the drive device in the dryer moving back and forth, hot air in materials and the cross flow, water vapour from the wet discharging hole in discharge, so as to achieve the purpose of drying. Network with 12-60 to wire mesh belt, the body length by a combination of the standard section, in order to save space, the drying mechanism into multi-layer, common has two room three and two-room five layers, length 6-40m, effective width 0.6-3.0m.

The material has the nose to enter slowly through the drying for drying, net belt line speed depending on the type of material and water content. Air flow to the use of negative pressure, porous air, to ensure the effective drying area, wind speed distribution uniformity, improve the drying effect. In order to get the best drying effect and the appropriate output, the water content of the material, the line speed of the net belt, the air volume and the air temperature must be the appropriate, reasonable and organic combination.

1.High drying efficiency, good drying effect. Mesh belt dryer is continuously working drying equipment, used feeding at one end and discharging at the other method for drying materials. Due to the special design on the inside structure of mesh belt dryer, mesh belt dryer has a high drying efficiency. We could control and adjust the final moisture content to client request.

2. Energy-saving, environment-protecting, no pollution, no noise. Mesh belt dryer could dry coal briquette, mineral powder briquette, mill scale briquette and food, medicine, vegetable, fruits, etc. This improves the resource utilization. Due to the special design of mechanical structure and electricity control, mesh belt dryer works at a low power. Also, mesh belt dryer is equipped with multistage dust collecting equipment to meet the national standard of environment protection. Reduce the environmental pollution from equipment; it is a kind of good energy conservation and environmental protection equipment. Our mesh belt dryer adopts enclosed structure; no air pollution and noise pollution will be happened during drying process.

3. Wide application range, low request for the working environment. Mesh belt dryer is applicable for every country in the world. We could make some adjustment according the different situation in different countries, such as voltage, engineering design requirement, geographical conditions, etc. As to the working environment, Mesh belt dryer could work normally in severe cold, high temperature, plateau, etc.

5. Few workers, simple operation, easy maintenance. To client request, we could provide semi-automation and total automation production line. Only regular maintenance to the instruction is needed. It is very convenient to maintain.

6.High safety. The transmission parts all adopt enclosed or semi-enclosed design to the equipment standard of security, such as transmission shaft, motor, belt pulley, etc. This ensures the safety of equipment and workers. And belt dryer is equipped with observation platform and sight hole to ensure the safety of equipment and workers.

biomass briquette manufacturing system model for environment - sciencedirect

Regular feedstock availability in comprehensive Biomass Briquette Manufacturing system.Biomass collection will minimize conflict of interest.Fast growing grasses cultivated with sewage water will reduce cost of briquetting.It will improve productivity and profitability.

India depends mainly on indigenous coal for its power generation and imported oil for its transportation needs. Most of the energy needs of rural poor are met by burning wood and other biomass in the least efficient manner adding to the GHG emissions. A comprehensive system of utilizing biomass energy to replace or supplement coal usage in power generation and industrial heating systems is a pressing need. Converting rural population to better fuels or efficient biomass burners will also help in reducing the growth of GHG emissions. An efficient network of Biomass Briquette Manufacturing system could help addressing most of these issues in a sustainable manner. The briquettes made from biomass can be mixed with coal for co-firing, used in gasifiers to produce syngas used for small scale power plants established in remote regions. This paper discusses the elements and needs of briquetting system and proposes ways to improve the productivity of the biomass briquetting system by eliminating bottlenecks and improving processes.

renewable energy resources and technologies practice in bangladesh - sciencedirect

Bangladesh has very limited nonrenewable energy resources of its own. She is facing energy crisis and serious desertification problem in rural areas. These issues could be removed if renewable energy is used as a primary source of energy in rural areas. It is essential for scientists and researchers to find out the renewable energy resources and effective technologies. Bangladesh is endowed with vast renewable energy resources such as biomass and solar insolation. Besides, hydro and wind power can be considered as potential renewable energy resources. Harnessing these resources appears to be a promising solution for improving the quality of life of rural villagers. The government and many non-governmental organizations (NGOs) have tried to comprehend and have strived to address the problem of energy. This paper reviews the renewable energy resources and renewable energy technologies (RETs) practicing in Bangladesh in terms of its implementation, research and development activities. The development and trial of systems are mostly funded so far by donor agencies in collaboration with government and NGOs.

Biomass energy sources are traditionally used for domestic cooking and in small rural industries. Approximately 60% of total energy demand of the country is supplied by indigenous biomass based fuels. Activities on the development and promotion of biomass technologies have been going on for one decade. Some national and international funds have been available for biogas technology, improved biomass cookers and production of biomass briquettes. At the time, around 25,000 biogas plants exist all over the country in rural areas and educational institutes, etc. More than 0.20 million improve stoves have been installed to save biomass fuel. Over 900 briquetting machines have been operating in the country on commercial basis.

The annual solar radiation availability in Bangladesh is as high as 1700kWh/m2. Research and demonstration activities carried out for one decade have led to a start of large-scale utilization of PV (solar photovoltaic) by various organizations and by NGOs. More than 61,500 solar PV systems of a total capacity around 3MW and 260 hot box cookers have been installed all over the country mainly in off-grid rural, hill tracks and coastal Bangladesh.

Kaptai hydroelectric power plant is the only one renewable energy power generation plant of the country that is generating 3.28% of total 3651.20MW. The first micro hydropower unit of 10kW has been installed in a village of Bandarban through private initiatives. The project is providing electricity to 140 families in the village and to a Buddhist Temple.

The annual wind speed at a height of 25m at some coastal locations is above 4m/s and much higher in the pre-monsoon and monsoon periods. The sites are suitable for power generation, particularly using PV or diesel hybrid technique for winter months.