charcoal briquette machine gypsum briquette machine coal

briquette machine,coal briquette machine,charcoal briquette machine

Ball BriquetteMachine can used to press various powders such as coal powder, iron powder, coking coal, slag, oxidation iron sheet, carbon dust, gypsum, tailings, sludge, kaolin, active carbon and burnt powder, etc. Mineral Powder Ball Press Machine applies on the industries such as refractory material, electric powder plant, metallurgy, chemical industry, energy, transportation and heating, etc.

The major parts of the briquetting machine, which is the roller. It depends on its quality of theroller's life. The roller's material is 65Mn and it divide into two kinds, one is whole casting, and theother is forging according to forming method. The density is small and the structure is rough, buteconomic. Casting is formed by air hammer heavy, which improve the density and wear resistance, sothat it extends the service life of the roller. The cavity of the roller has good flow chart. This kind ofroller fit for all kinds of materials. It fits for metal powder materials, but the disadvantage is a littleexpensive cost.Standard configuration roller is cast metal 65Mn9Cr2Mn2,while providing forged roller optional.

Briquette Machines two vice-roll pre-press materials in the form of pipeline to lay a solid foundation for the finished ball. For finished products heroes ball solid foundation. After the main roll for feeding and secondary pressure, the pressure of materials multiplied, squeeze the ball more solid product. After the raw materials pass this line, the briquetting pressures diminish quickly, and then make the materials enter off ball state and off the ball smoothly.

Type Capabilityt/h Roll Diametermm Roller Surface Pressuret/cm Roll Speedr/min Power (kw) Reducer YHQ-290 1.5-2 290 1 15-17 5.5 ZQ300 YHQ-360 2.5-3.5 360 1 15-17 7.5 ZQ350 YHQ-400 4-5 400 1 15-17 11 ZQ400 YHQ-430 5-7 430 1 15-17 11 ZQ400 YHQ-500 6-8 500 1-2 15 15 ZQ500 YHQ-500 8-10 500 1-2.5 15 22 ZQ500 YHQ-650 10-15 650 1-2.5 15 30 ZQ650 YHQ-750 15-20 750 1-2.5 13 30 ZQ750 YHQ-850 25-30 850 1-2.5 13 37-45 ZQ850 YHY1000 35-40 1000 1-2.5 12 45-75 ZSY-355 YHY1000 35-45 1000 2-2.5 10 75-90 ZSY-400 YHY1200 45-50 1200 2-3 10 132 ZSY-500 Related ModelsLime Briquette Machine, Desulfurization Gypsum Briquette Machine, Magnesium Briquette Machine, Coal Briquette Machine, etc.

5 most common briquette machines divided by materials | fote machinery

Nowadays, all industries are implementing the environmental protection concept "everyone has a responsibility to protect the environment". Many kinds of waste have been recycled and turned into treasures.

For example, construction waste can be recycled and crushed into building aggregates; powder produced by the mining process can be reused after processing; the desulfurization gypsum of the power plant can also be used to replace natural gypsum.

All these types of powder, waste, residue materials such as coal powder, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke can be pressed.

First of all, the finished charcoal briquettes not only have the characteristics of smokeless, odorless, non-toxic, environment-friendly, but also has large heat, long burning time and are stable in heating.

Secondly, because the a briquetting machine or plant can produce material into different shapes, the final product is convenient for storage and handling. Besides, the finished product has a superiority that it is cheaper than other fuel.

Coal ash, commonly known as fly ash, refers to the dust and tailings collected from the coal-fired (including coal gangue and coal slime) smoke and the desulfurization and denitration ash generated in the production process of the thermal power plant.

The coal ash particles have a porous honeycomb structure, a large surface area, and a high adsorption activity, and the particle size ranges from 0.5 to 300 microns. And the bead wall has a porous structure, the porosity is as high as 50%-80%, and has strong water absorption.

With the development of the power industry, the amount of coal ash discharged from the thermal power plant has increased year by year, making it one of the most industrial wastes with current displacement.

If there are too much coal ash, it will pollute the atmosphere; if it is discharged into the water system, it will cause the siltation of the river, and the toxic chemicals in it will harm the human body and organisms. For these reasons, human beings need to press it into briquettes.

On the other hand, it is used as a raw material to obtain various benefits through processing. It can make coal powder burn more completely, get more heat energy and save resources, besides, it is clean and easy to store.

The rate of raw material consumption and waste generation in the metallurgical process is staggering. As the plant operates, lime powder is continuously produced and piled up. Before too long, it will cause blockages and environmental pollution.

However, if recycled, it is still a resource. Since it is powdery, it is difficult to store and transport. So, it is the most correct way to process it into chunks. Therefore, the quicklime dry powder briquette machines came into being.

Desulfuration gypsum, also known as flue gas desulfurization gypsum, sulfur gypsum or FGD gypsum, is industrial by-product gypsum obtained by desulfurization and purification of flue gas generated after combustion of sulfur-containing fuel (coal, oil, etc.).

According to the difference between the burning coal type and the dust removal effect of the flue gas, the desulfurized gypsum presents different colors from the appearance. Generally, the common ones are grayish-yellow or grayish-white, and the desulfurized gypsum of good quality is pure white color.

It mainly comes from the flue gas desulfurization process of the thermal power plant. Most of the power plants adopt the limestone-gypsum desulfurization process. At present, nearly 20 countries have adopted the flue gas desulfurization process in the world.

The sulfur dioxide in the flue gas is oxidized with calcium carbonate and air in the slurry to form calcium sulfate, and the calcium sulfate reaches a certain saturation, the calcium sulfate dihydrate will be crystallized, and then is discharged into the absorption tower, concentrated, dehydrated, and transported to a gypsum silo for stacking.

The price of desulfurization gypsum briquette is low. Compared to natural gypsum, desulfurized gypsum is renewable, the purity is higher, and the composition is more stable. It is easy to use after briquetting. People can make full use of the materials while reducing air pollution and dust pollution.

The above is a brief introduction to the 5 most common materials in the briquette machine. If you have any questions about the article, please let us know by leaving a message or chatting online, we will reply in 24 hours.

As a leading mining machinery manufacturer and exporter in China, we are always here to provide you with high quality products and better services. Welcome to contact us through one of the following ways or visit our company and factories.

Based on the high quality and complete after-sales service, our products have been exported to more than 120 countries and regions. Fote Machinery has been the choice of more than 200,000 customers.

briquette machine,briquetting presses making for charcoal,coal,mine powder

Anyang GEMCO Energy Machinery Co., Ltd (subsidiaryofABC Machinery) is a professional manufacture and supplier of briquetting machines in China. Our briquette press machines are applicable for making charcoal, coal, and mine powder briquettes. We sell roller briquetting press, screw briquetting presses and complete briquetting line.

Established in 1992, Anyang GEMCO Energy Machinery Co., Ltd (subsidiaryofABC Machinery) deals primarily in manufacturing and exporting of complete briquette machines. Importing and exporting of various mechanical products and engaging in economic and technical cooperation with clients.

We design and manufacture 2-30T/H complete briquetting machine, roller briquetting machine, Dry Powder Briquetting Press, screw briquetting machine, Shisha charcoal briquette press, coal ball machine and metal scrap briquette press machine. The finished l briquettes made by our machines are high density, perfectly shaped and have a good appearance.

Briquetting is the transformation of a powdery or granular material into a larger more convenient size solid product. This is accomplished by compacting the material with a roller press, sometimes in the presence of a binding material. The briquettes can be produced with high or low pressure and can undergo mechanical or thermal treatment according to the characteristics of the processed material. The binder is used and the desired end product is complete.

Tel: (86) 372 5965148 Fax: (86) 372 5951936 E-mail: [email protected] Anyang GEMCO Energy Machinery Co., Ltd. Copyright All Rights Reserved Briquetting Press | Biomass Pellet Plant | Small Pellet Mill

charcoal briquette machine,briquette machine,charcoal machine,briquetting machine manufacturer,supplier,factory

Raw Materials--Wood Crusher--Belt Conveyor--Roller Vibrating Screen--Belt Conveyor--Dryer--Screw Conveyor--Screw Conveyor--Dosing Silo--Charcoal Making Machine--Belt Conveyor--Carbonization Stove--Briquette Charcoal--Packaging Machine--Control PLC

sawdust briquette machine,briquette making machine,hydraulic briquette machine,coal briquette machine,charcoal briquette machine,biomass briquetting machine,shisha charcoal machine,biomass briquette machine

Gongyi City Jiuxin Charcoal BriquetteMachinery Co.,LTD. is a high-tech R&D enterprise, which engages in manufacturing and selling Charcoal Briquette, briquette machine,charcoal machine,wood crusher,wood dryer,charcoal briquette machine,carbonization furnace,Shisha Machine,Ball Press,Honeycomb Coal Machine,Coal Extruder Machine, and other small machine. The company is located at No.36, Xinxing Road, Gongyi City, Henan Province and close to the exit of S31 and G310 expressway of Lianhuo Highway. Jiuxin Clay Brick Machinery has the excellent geographical advantage.

Gongyi City Jiuxin Clay Brick Machinery Co.,LTD. is a high-tech R&D enterprise, which engages in manufacturing and selling Common Extruder,Vacuum Extruder,Automatic Brick Cutter,Brick Setting Machine and other small machine.

Jiuxin Machinery adheres to the management policy "people-oriented, regulation-oriented", since its foundation. We are absorbed in every detail to insure the good quality. The company implements the high-quality management from reaching the pre-procurement standard to satisfying the users. Jiuxin wins the recognition and trust of the customers.

In technological innovation and improvement, Jiuxin Clay Brick Machinery invests to import of the advanced facilities and reinforces cooperation with the counterparts and scientific research institutions from home and abroad. The company makes the products in a lead and update status all the time.

Market is the only criterion for testing quality. In our constant pursuit and effort, we are willing to use our strength, sincerity and diligence to serve our customers, to create value for our motherland.