These are built for high capacity reclamation from surge bins, bunker and hoppers. A wide range of sizes is available in MSEL offerings. Heavy Duty versions with larger drives and heavier pans can be selected for coarse Stones and normal versions for fine Stones.
These are continuous volumetric device reclaiming dry small lumps, coarse, fine grained and powdery material e.g. river bed gravel, sand, alumina etc. from surge bins and hoppers to feed subsequent equipment.
These are used in primary crusher operation in Quarry Mining as scalping screen downstream of the Primary Crusher to separate undersized and oversized Stone. Typical separation is at 80 mm. These are also used as Feeders to reclaim Stone from Hoppers/Bins.
Also known as CM Screens, these are used to segregate various size fractions in Stone streams. Sometimes used to reduce load on crushers by removing fraction which is already smaller than required size at other times these are used to recirculate oversize fractions from crushed product stream back to crushers. These Screens are available in 1, 2 and 3 decks to get 2, 3 and 4 size fractions respectively. Each size fraction may be requiring different post processing.
These are ideally suited for heavy and very heavy screening applications for fine grain size materials (1 mm to 10 mm) with screening capacities up to 250 metric TPH. The base frame is agitated by means of eccentric shaft drive. The vibration is passed on to the dynamic frame via thrust rubbers.
Screening mats between the inner and outer frame are clamped and flexed by the two vibrating frames. The relative movement of both screening frames creates a trampoline effect in the screen mats to create-
These are multi-slope vibrating screens, come in single/ two deck configurations and are used in place of Circular Motion Screens when higher capacities (above 400 tph) are to be processed. The angle of deck decreases from feed end to discharge end.
MSEL has a large range of skid mounted and wheel mounted Crushing & Screening plants in various configurations to suit multiplicity of sized products in various capacities catering to production of coarse, medium and fine aggregates and road stratum material.
MSEL-NFLG Dry Mortar Mixing Plants are environment friendly and characterised by High Efficiency, Low Energy Consumption. The range Tower, Ladder and Station configurations covering a production range of 5 t/h to 80 t/h.
We can offer the sand washing plant with the water recovery equipment for the best quality of sand production with conservation of environment. We can offer the customised solution for any size/ capacity as most of the equipment used in this plant ie Thickener, Slurry pump and Filtration System are our regular product.
We can give total solution for the slurry handling and ETP of the stone industry. We have the slurry pumps for the Grit recirculation, vertical slurry pumps for the water collection/ pumping, settlers, Flocculent dosing system and filter press under one roof.