double shaking table gravity gold sand separator machine

gold shaker table sales,shaking table,gold separator - jxsc

The gold shaker table is a flow film separation equipment, that usually used to separate the gold particle grains from the ore material in the gold processing plant. Shaking table concentrator is developed from the early stationary and movable chute box, from percussion shaking table ( used in the coal mining industry) to the wilfley table and mineral processing eccentric rod shaker table, various type of gravity table separators have been developed and applied, especially in the recovery process of some precious metal like gold. Contact us to get the latest shaker table price.

Capacity: 0.1-2tph Feeding size: 0-2mm Applications: Gold, Tin, Chrome, Tantalum-niobium, Tungsten, Iron, Manganese, Nonferrous metal ore, and so on. Introduction: Gold shaker washing table can obtain the fine-grained materials, and separate the high-grade concentrate, taillights and intermediate mineral products during once processing. According to the different grain size of the ore material, it can be divided into coarse sand (2 - 0.074mm), fine sand (0.5 - 0.074mm), and ore slurry (0.074 - 0.02mm), the suited gold separate machine is varied with the material particle size, the main differences among them are the shaking table surface sluice, height, angle and so on. Main parts: table head, motor drive, stand, working bed, support frame, water tank, feed chute, angle adjuster device, spring, etc.

Types of shaking table: 1. Shake table for sale classified by uses: ore sand, ore slurry, mineral processing, coal dressing. 2. Classified by structure ( table head, surface, supporting frame ): 6-S shaker table, Gemini table, CC-2 gold wash table, spring concentrating table, centrifugal table, rp 4 shaker table, and so on shaking table mineral separation. 3. Classified by deck: single deck shaker table, the multideck table has double decks, three decks, four decks, six decks, and more.

Working principle of the shaker table: As a gravity separator machine, the shaking table separates the minerals mainly dependent on their differences of gravity, density, shape, etc, in addition, the water flow speed, slurry density, surface angle and so on variables also matters. The target mineral grains, from fine to coarse and light to heavy, can be classified by weight. The shaking table concentrator not only can be an independent beneficiation machine, but also connect with jig machine, flotation, magnetic separator, centrifuge concentrator, spiral concentrator, belt conveyor and so on.

Mining Equipment Manufacturers, Our Main Products: Gold Trommel, Gold Wash Plant, Dense Media Separation System, CIP, CIL, Ball Mill, Trommel Scrubber, Shaker Table, Jig Concentrator, Spiral Separator, Slurry Pump, Trommel Screen.

leaching tank, electric separator products from china manufacturers - jiangxi hengchang mining machinery manufacturing co., ltd. - page 1

Jaw Crusher, Ball Mill, Shaking Table manufacturer / supplier in China, offering High Efficient Gold Recovery Machine Alluvial and Placer Gold Mining Equipment Sand Gold Separation Recovery Plant, 1 Ton Ball Mill for Rock Gold Mining Grinding Plant 900 X 1800 Ball Mill for Gold Grinding Plant, Factory Price Grinding Process Stone Gold Ore Ball Mill Rock Stone Gold Grinder Ball Mill Grinding and so on.

shaking tables for gold mining and concentration - jxsc machine

Capacity0-60T/d Feeding concentration15%-30% Feeding size0-2mm Applicationgold shaker table is a gravity separator machine that can separate gold, tin, tungsten, lead, manganese, tantalum, chrome and so on precious metals, nonferrous metals. Serviceshake table design, mineral separation test, process flow design, on site installation.

Gold shaking tables also known as gold shaking table, gold separation table, it is a fine gold recovery equipment common in the gold shaker wash plant, alluvial gold mining plant to separate concentrates, medium concentrates and tailings according to material density and grain size. Gold mining shaker table can not only be used as an independent beneficiation machine, but it often works with jig machine, centrifugal concentrators, sluice box, flotation equipment, magnetic drum separator, spiral classifier, and other ore dressing equipment. Types of gold shaking tablesseated table and suspended table; single-layer shaker and multi-layer shaker; coarse particle (2~0.5mm), fine gold (0.5~0.2mm); rp4 shaker table, 6-s shaker; industrial shaker table, mini gold shaker table, lab shaker table, portable shaker table; etc. Table surface materialsglass-reinforced plastics (glass fiber reinforced polyester resin) and aluminum alloy (laboratory use). Gold shaker table for saleHigh efficiency, separate the gold concentrate and tailings at the same time. 2. Easy to install, operation, and maintenance 3. Adjustable stroke length and speed 4. Low investment, long service life 5. Flexible and portable.

Main partshead, electric motor, slope regulator, ore tank, water tank, compound strip, and lubrication system. Shaking table working principleShaking table mineral separation is an inclined table, the combined action of the symmetrical reciprocating motion of a mechanical slab and the flow of water on a thin inclined plane, causes loose layering and zoning of ore particles on the table surface, thereby causing the mineral separation process to be carried out according to different densities. Gold shaker table manufacturerJXSC supply different types of shaking table concentrator globally, popular in Australia, South Africa, Ghana, Congo placer gold processing plant. JXSC gold shaking tables are a new generation gold concentrating table, with a good effect on fine gold recovery, welcome to visit us do shaking table mineral processing test. Competitive price, good quality equal to Gemini table, MSI mining equipment, Wilfley table. Contact us to get the latest shaking table price. The gold shaker table is a fairly small scale gold mining equipment compared to the ball mill, trommel scrubber, etc.

double deck gold shaker table - jxsc machine

The double deck gold shaker table is an innovative product of the traditional single deck shaker. It covers small area, large processing capacity, energy-saving, relatively low equipment cost, high rich ore ratio, high efficiency, easy to adjust the stroke. The balance of the bed surface can be maintained while changing the lateral slope and stroke. The spring is placed in the table body, the final concentrate and final tailings can be obtained at one time.

The introduction of the 6-S double-layer shaker solves many problems in the use of the 6-S single-layer shaker. Used to sort the first section of grinding products in the 0.4 mm size. The main minerals that can be treated are white tungsten, stibnite, natural gold, pyrite, quartz, etc.

The 6-S double-layer shaker adopts the same form base as the 6-S large channel steel bracket shaker. The two base feet are placed on the large channel steel base, and the welded channel steel bracket is raised on the large channel steel plate for placing the shaking head. The shaker surface adopts the same bed surface with the same size as the original bed surface on the 6-S single-layer shaker bed surface, and the upper and lower layers are supported by steel plates. The spacing between them is 400 mm and the free space is about 300 mm. The bed is still equipped with a double crank rocker mechanism. The spring box is outside the rocking box, and the crankshaft, tie rod, spring, rocker, and other components are correspondingly enlarged in size, and the material is more standardized. The bed surface is an FRP bed surface, and the upper and lower layers are all 182315584520 mm. The upper and lower bed surfaces share a set of slope regulating devices on the lower bed surface, which are supported by rocking brackets. The radius of the rotating arc of the adjusting seat plate and the base is increased to 545mm, so that the center of rotation of the circular fulcrum is on the same line as the center of the traction screw.

Double shaker table widely used in the selection of tungsten, tin, antimony, antimony, gold and other rare metals and precious metal ore. It can be used for rough selection, sweeping and other different operations, sorting different grades of coarse sand (2-0.5mm), fine sand (0.5-0.074mm), slime and so on. It can also be used to select iron, manganese ore and coal. When processing ore such as tungsten or tin, the effective recovery particle size of the shaker ranges from 2 to 0.22 mm.

The grid is one of the important factors affecting the sorting effect of shaker. The choice of grids includes grid paving design, grid combination and grid geometry. (1) Paving design The paving bars must be kept on the same plane. The closing grid (ie the first grid) is 2-5 mm higher than the second grid treaty and requires straightness. Otherwise, the horizontal flow will be unevenly distributed and the bed will be disturbed. The pavement design should also pay attention to the size of the sweeping angle. When the tail coal content is small and the medium coal content is large, a smaller sweeping angle should be used to increase the tail coal ash. (2) grid combination When the ratio of the particle size of the feed material is large, it is preferable to use a combination of high and low intervals. The height of the bars depends on the particle size of the feed. Use high bars when the granularity is large, and use low bars if the granularity is large. (3) grid spacing In order to maintain sufficient eddy current strength, the spacing of the bars should be large when washing large particle sizes, and the spacing should be small. However, when the slime contains a large amount of fine coal or vermiculite, a larger grid spacing should be used.

When the feed ability is good and the net coal content is high, a longer feed tank can be used in the main washing shaker because there is still a chance to wash again. When the feed ability is poorly selected, or the shaker is washed again, the feed tank should be shorter, which can both increase the throughput and ensure the quality of the product. Proper selection of springs creates conditions for material sorting and transportation. When the shaker moves forward, the spring is compressed, and the return force is used to assist the normal operation of the differential mechanism by the thrust of the spring itself, and the spring is adapted to the rigidity required of the shaker. At the same time, the tightness of the spring should be appropriate. When it is too tight, the differential is small; when it is too loose, the mechanical vibration is large, so it is necessary to keep the sound of the shaker running normally.

Adjusting the horizontal flushing water to ensure the medium coal and tailings ash, and accurately and timely transport the materials to the important conditions of each sorting zone. When the flushing water in the clean coal area is large, the medium coal is easy to pollute the clean coal; while the middle coal area is flushed with water, the tail coal is easy to pollute the coal. Therefore, the size of the flushing water should be adjusted. (1) In the case of more material in the coal section of the coal area and more coal particles in the tailing coal area, it is necessary to increase the flushing water in the clean coal area close to the feeding tank to maintain the freedom of the surface material in the coal area. Smooth, the coal slurry has sufficient fluidity along the bed surface and good stratification conditions. The water stream is to be immersed in all the coal particles. (2) If there is more coal in the tailing coal area, it is necessary to increase the flushing water in the coal area, so that the coal ash and tail coal ash can be ensured. (3) If there are many meteorites in the tailing coal area, it is necessary to increase the horizontal flushing water in the tailing coal area and remove the meteorites in time to avoid affecting the tailing coal discharged from the coal area. It is required that the horizontal flushing water should not be too large, otherwise it will affect the quality; the horizontal flushing water can not be too small, too small can not guarantee the recovery rate, and the medium coal and tailing coal ash can not be guaranteed.

The feed concentration is one of the main adjustable factors of the shaker, which directly affects product quality. Based on practical experience, we believe that the feed concentration can be adjusted according to the following principles. (1) It is required that the coal slurry has sufficient fluidity along the bed surface and good stratification conditions, and the water flow should be immersed in all the coal particles. (2) When selecting coarse coal, a higher concentration is required; when fine coal is selected, a lower concentration is required. (3) Guarantee the quality of clean coal to adjust the feed concentration. Ensure the quality of the tailings is mainly to adjust the horizontal flushing water. (4) The balance between the feed concentration and the feed amount must be ensured. When selecting the coal coarse coal, the concentration required is higher, generally 350-400g/L. When fine coal is selected, the required concentration is low, generally about 300-350g/L.

The amount of feed to the shaker is related to the feed size and optionality. When the feed size is large and the selectivity is good, the feed amount can be large, and vice versa. When the feed ability and the characteristics of the shaker are constant, there may be a certain amount of feed. At this time, under the corresponding stratification speed and accuracy conditions, the feed amount should be balanced with the discharge amount of the product. Otherwise, the processing volume is too large, too late to stratify, affecting the quality of sorting; if the processing volume is too small, it is not enough to lay the bed layer, and the sorting is not good.

The position of the bed should be increased so that the centerline of the traction screw is overlapped with the bisector of the upper and lower bed spaces so that the traction forces of the upper and lower beds are substantially equal. The center of the traction screw and the center of the rotation arc of the slope-control device are on the same line, which is convenient for turning the slope, otherwise, it will not turn. The motor capacity is adjusted as appropriate.

JXSC, a Chinese mining equipment manufacturer, has been providing the gold shaker table for 35 years, includes single deck shaker, Doule deck shaker, and multilayer shaker. Contact us for the shaker table selection guide.

gold shaking tables selection | jxsc machine

Gold Shaking Table is fundamentally low-volume machines utilized as the last step in the gold mining process. The shaking table is a thin film, shear stream process hardware, that isolates pieces grains of its nourish material in view of the particular in their particular gravity, size, and shape. Mineral-rich particles, from light to large and fine to coarse will be arranged by net effective weight. It is a gravity wet process mine machinery, the table deck is made of fiberglass reinforced with a wearable corundum surface. The mining shaker table is composed of three parts: the table head, the table deck, bearing and adjusting gradient. Shaking table widely used to separate gold, tin, tungsten, chromite, silver, diamond, zircon, tantalum-niobium, lead, zinc, copper, other rare metal and noble metal ores.

The working principle of the Shaking Table is separates the heavy material from light material by using their different proportion & specific gravity, under the effect of gravity, the minerals will divide into the ore concentrate, the middling and the tailing. The prominent advantage of the ore shaking table is precise separation. The enrichment ratio of concentrate is very good, up to 95% high recovery ratio for kinds of heavy minerals, when dealing with low-grade tungsten ore and tin ore, the enrichment ratio could reach about 300 times.

At the final pounded or ground mineral material runs as feed blended with water to frame a mash (mud) and sustained as the slurry of a normal around 20 25% of solids by weight onto the most top purpose of the table deck. The gold tables deck has an equal motion along with its fundamental hub that is given utilizing a vibrator or a volatile head movement.

The table surface is made and fitted with a few narrow strips called riffles or channels, frequently made with of yellow pine that lead to back in time, low-thickness polythene or aluminum surfacing. Shaking tables and other thin-film isolating plants recuperate finely separated gold under terms of subcritical laminar and supercritical laminar administrations of the stream, which may happen just where there is a thin profundity of liquid.

A gold shaking tables riffles decrease downwards in rising toward the path the gold and all heavy material, valuable metals concentrate release end of the table. This encourages the simplicity with which mineral particles can move transversal to the tables pivot or shaker-line, subsequently helping segregation over the entire table length. Riffle statures and pattern diagrams are chosen in view of the crave and required functioning as anticipated.

There are a couple of steps that should be taken keeping in mind the end goal to get your gold shaker table to work effectively. The initial step that trying gold mineworkers must take is ensure that every one of the four corners of the table is level from forward to back. It is imperative to anchor the bolts with the goal that the shaking of the gold goes to the table and not through the casing. After you start running your table, you may need to alter your table from side to side to keep up an even stream of materials on the two sides of the table.

A gold shaker table contains a water get to point where you can fill it with clean water, which can be seen directly under the control territory. On the other hand, you can straightforwardly fill the tank of the shaker table with clean water. The water entrance point enables you to link a clean water framework through a garden hose. The valve that is directly behind the tank is then switched off and the pump framework isnt running amid the way of running fresh water. At the point when clean washing water is reached at the highest point of the table at right angles, particles are moved corner to corner over the deck and separate from each other as per their size and density or thickness.

Amid the quick shaking process, you will steadily start to see the partition of materials. For instance, when you have soil and shakes that contain materials like lead, sulfides, and gold, in view of the fluctuating weights of these diverse materials, you will see these materials wander off in various ways on the shaker table. The lead and the sulfides will be transfer to the correct side of the table while the pure gold will be carried to the far left half of the table.

There is one term to recall when proficient gold miners describe the activities of a gold shaker table. At the point when proficient gold miners say that little particles of gold are being helped through the grooves, they are deal with the ripples that you can evidently observe on the shaker table. When they say that there is a flood of materials like Black Pyrrhotite, White Quartz, silver and gold on the grooves, at that point this is something worth being thankful for.

At the point when materials are washed with the clean water, they should drop into 3 containers underneath the table. There is an inside wash that will assemble the purest parts of gold while the two outside washes will accumulate some gold, however not to such an extent as that pure.

Moreover, for our 6S shaking table, there are 3 different table decks available: coarse sand deck, fine sand deck and slime deck, also be called as roughing table, and cleaning table, it has 46/60/88/120/138 Riffles available. 46 riffles deck is suitable for particle size in the range of 0.5-2mm, 60 riffles deck for 0.5-1mm, 88 riffles deck for 0.1-0.5mm, 120 riffles deck for 0.074-0.5mm, 138 riffles deck is for finest size of 0.037-0.074mm.

From the year 2016, JXSC factory made an improvement for shaking table design and appearance, we produce a new type table concentrator, compared with our ordinary shaking table, the features & advantages of New Types are:

Usually, the shaking table plays an important role in both the alluvial gold & rock gold mining process, it is a concentrate mining machine in the later beneficiation stage. The most common flow of Alluvial Gold is Gold Trommel Washing Machine, Gold Centrifugal Concentrator, Gold Sluice Box and Shaking Table.

While for Rock Gold mining, the gravity flow is Crushing > Screening > Milling > Concentration (Shaking Table). The superfine particles from the ball mill will feed into a shaking table through the hydraulic classifiers, which can ensure different size distribution ore/slurry feed into different riffles shaking table, in order to reach a higher recovery ratio.

JXSC, a Chinese mining equipment manufacturer, has been providing the gold shaker table for 35 years, includes single deck shaker, Doule deck shaker, and multilayer shaker. Contact us for the shaker table selection guide.