dryer 8800yco belt replacement

how to replace a dryer belt | how-tos | diy

Unplug the dryer. If the plug can be reached without moving the dryer, the dryer probably won't have to be moved. Use a putty knife to press the clips holding the lid in place (Image 1). Lift the lid. Look at the existing belt. If it looks worn (Image 2), it will need to be replaced.

Disconnect the electrical connection for the door switch from the front of the dryer (Image 1). Remove the screws holding the front cover of the dryer in place (Image 2). Lift up the front cover, and pull it off the dryer.

The belt will be threaded around an idle pulley and looped over the drive shaft. The idle pulley helps keep the belt tight (Image 1). Place the new belt around the drum so that the rubber surface (Image 2) touches the drum. The rubber surface has ridges that help it keep good traction.

The idle pulley helps keep the belt tight (Image 1). Place the new belt around the drum so that the rubber surface (Image 2) touches the drum. The rubber surface has ridges that help it keep good traction.

Reach underneath the drum to access the drive shaft (Image 1). Set the idle pulley in position if necessary. The pulley snaps into two grooves in the cabinet body. Loop the belt under the idle pulley, and attach it to the drive shaft (Image 2) Replace the front of the dryer, and attach the top by reversing the removal procedure.

Set the idle pulley in position if necessary. The pulley snaps into two grooves in the cabinet body. Loop the belt under the idle pulley, and attach it to the drive shaft (Image 2) Replace the front of the dryer, and attach the top by reversing the removal procedure.

how to change a clothes dryer belt (with pictures) - wikihow

wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 25 people, some anonymous, worked to edit and improve it over time. There are 11 references cited in this article, which can be found at the bottom of the page. This article has been viewed 318,865 times. Learn more...

One of the most common causes for a clothes dryer to fail is a broken drive belt on the dryer drum. This is an easy do it yourself repair, which uses very few tools, and can save a lot of money. Here are the steps for accomplishing this task.

how to repair | how to replace a aeg tumble dryer belt

How to replace a belt on a condenser tumble dryer Zanussi, Electrolux & Aeg Tumble Dryer Belts The first thing you will notice if your tumble dryer belt has snapped, is the dryer is making a motor noise but the drum is not turning or the dryer is not drying. If the drum in