excavator attachments for grinding rock

excavator attachments | demolition equipment | epiroc us

The excavator became a universal tool carrier, which resulted in a much higher level of machine utilization and efficiency, bringing these advantages in turn to our customers. So it all started with the hydraulic breaker and Epirocs knowhow in this field is unique. Our innovations in breaker technology over the years speak for themselves: Combined Gas/Oil technology, the Solid Body concept, breakers without side bolts, AutoControl, and so on. But it hasnt stopped there since then many other excavator have been added to the well-known Epiroc product family we call Hydraulic Attachment Tools.

Each excavator attachment enables our customers to meet different challenges on demolition jobsites, in recycling applications, in the mines or quarries. All these tasks which require robust, powerful tools which could not be handled with an excavator and a bucket alone.

mini-excavator brush cutter | paladin attachments

Paladin is expanding its offerings for mini-excavators with a new line of brush cutters, the MX Series.The MX Series is compatible with 3mT - 10mTmini-excavators, and facilitates a variety of applications, including over-fence brush management, embankment and ditch management, and rail right-of-way management.

With a solid formed T-1 steel deck and reversible AR400 cutting blades, the MX series can efficiently process brush and trees up to 6 in diameter. Equipped with Paladins bolt-on mounting system, it offers a seamless configuration to a variety of coupling systems; if coupling requirements change, units can be quickly and easily reconfigured without welding or grinding, even in the field.

We believe safety and productivity go hand-in-hand. When operators are safe, they work with more confidence and see increased outputs. The MX has several unique safety features that help operators get more done and stay safe at the same time:

No, this product will not substitute for a mulcher. The three blades are directionally beveled so debris is pushed into the head of the cutter, creating finer debris (for easier recycling) than other cutters. However, if you need mulching capabilities, please consider our other mulching products.

The MX Brush Cutter uses three swinging blades mounted to a triangular blade carrier to maximize performance. The cutter rotates in one direction, and the blades themselves are reversible, so when the leading-edge wears, operators can unbolt the blade, flip it over, and use the other side. Many application factors would influence a blades life, but blades and their replacements are made from a special hardened, abrasion-resistant steel designed specifically for this application. All MX models use identical blades, so the same blades will work for all.

The MX Brush Cutter can handle heavier brush, is more versatile (doesnt require a case drain line), is compatible with our top-cap system, and has greater debris control. The Flail Mower, however, might be the right product for you for applications like finish mowing, if you have unique storage/transportation requirements, or if youre seeking a product that is thumb-compatible.

The MX Brush Cutter is designed to bring more versatility to your mini-excavator and allow you to accomplish some unique applications. With this product and the reach provided by mini-excavators, difficult areas like embankments, over fences, and high-reach areas are more accessible. If you are looking are an attachment for your skid-steer, or need mulching capabilities, however, the GroundShark might be best for your project.

stump grinder attachment - bobcat company

Notice: We use cookies to enhance your online experience with Bobcat Company. You can click here to learn more about how cookies are used on this site. By continuing to browse this website, you agree to our use of cookies in accordance with our privacy policy.

Maybe youve owned Bobcat equipment for decades or it's your first purchase. Were here with helpful guidance, limited-time offers and financing, and tools to help you find the machine that suits your needs.

Grind tree stumps into mulch with the powerful action of the stump grinder attachment. Designed for maximum operating capability, the stump grinder mounts directly to the front of a carrier for easy maneuvering in tight areas and positioning exactly where grinding action is needed. Mounted at a 90-degree angle to the operator, the stump grinder offers increased visibility to the cutting area, giving the operator the same wide view as with any pull-behind grinder. The stump grinder is the ideal attachment for landscaping contractors, homeowners with acreage, campus facilities, municipalities, and rental contractors.Stumps are eliminated even more quickly when used with machines equipped with high flow hydraulics.

Bobcat, the Bobcat logo, the colors of the Bobcat machine, and various other product names referenced on this website are trademarks of Bobcat Company in the United States and various other countries.

rock grinders, rock grinding equipment attachments - rock tools attachments, llc

RockTools has been providing rock grinders and rock grinding attachments for equipment including excavators, mini excavators, wheel loader buckets, and more! We have years of experience providing the tools you need to get your job done.

With more than 3 decades of excavator attachment experience Rock Tools, Attachments is a leader in finding cutting and grinding solutions for rock, concrete, steel, aluminum and just about any material type found on planet earth. We also offer saws for accurately cutting many types of material. Our quarry saw is used to mine dimensional stone products in limestone, marble, sandstone and many other types of sedimentary and igneous rock types. Our quarry saw can be found cutting granite in British Columbia, Canada to cutting Marble in Bari, Italy.

The first step in finding the ideal grinding solution is to establish the unique requirements for any project. Our sales team is versed in all types of materials and has in depth experience with all makes and models of heavy equipment, Call Us Today to consult with one of our applications engineers to select the best product to grind your material and fit your existing equipment.

Disclaimer: All information provided on Rock Tools Attachments Web sites are subject to change without notice, including the availability of products and services. While efforts have been made to make Rock Tools Attachments Web sites helpful and accurate, due to the open nature of sites, and the potential for errors in the storage and transmission of digital information, Rock Tools Attachments does not warrant the accuracy of information obtained from any Rock Tools Attachments Web site.

drum cutter attachments for excavators | epiroc us

In demolition and rock excavation today, a new technology is breaking through, mainly driven by legislation, to reduce sound and vibration, but also due to better performance in certain applications and material properties

rock rascal lapidary equipment for grinding and cutting

A portable combination unit complete with a 6" Pro-Slicer Diamond Blade, 6" silicon carbide grinding wheel, 6" aluminum head with sponge rubber pad, wet or dry silicon carbide sanding discs and a 6" felt polishing pad. It is powered by a 1/4 hp motor. One side cuts and trims, the other side grinds, sands and polishes. This is a good unit for faceters or anyone needing a complete, compact, portable lapidary unit to grind, cut and polish small stones.

This unit is speed controlled with a foot pedal which makes it great for freeing up your hands to create masterful pieces. The 55 pieces includes attachment for grinding, drilling and cutting. Comes in a sturdy case.

3" Posts and 5" Posts Slab Grabber Made to get the Slabs left in the nub-ends. One slab saved, usually pays for the SLAB-Grabber. Chucks level and parallel in your saw vise for uniform slices. Made of aluminum for blade safety, and positive nub holding. Made in the USA. 11" Posts Slab Grabber The larger version of the famous Slab Grabber introduced by Rock's many years ago. The 11" model will hold slabs in wide range of sizes: 3" to 11" in diameter. It will also hold those more common odd shapes as there are 12 different spots for locating the holding studs. Made of aluminum for blade safety.

Never run a diamond cutting blade dry as it can immediately damage your blade. Coolant oil should be kept clean and below 100 degrees F. Sludge should be removed periodically and replaced with fresh coolant oil so your cuts will be clean and your blades will not be damaged.

This Non-hazmat replacement oil excellent lubricating properties for blades and saw parts. It flushes sludge from rock easily, degreases easily and sludge settles in the saw tank well. Comes in a one gallon plastic jug.

A heavy duty water soluble synthetic cutting and grinding fluid with lubricant. Most advanced 100% synthetic coolant on the market today. 100% Biodegradable - mix with water only. Does not contain any nitrosamines, phenols, nitrates, sulfur, chlorine, phosphates or oil. Comes in a 8 oz plastic bottle.

A thermostatically controlled ceramic electric heater for melting and keeping your dop wax at the perfect temperature along with built in storage for your tools! Key Features include:

110/60HZ Wire Plugs UL Approved 3 Variable Speeds: - 0 to 5000 - 0 to 6400 - 0 to 8600 Work Surface Dimension: 6 9/16" x 6 9/16"

This is 5 - 1 1/2 mm diamond wire drills for drilling holes in stones. Use these to drill a hole for a bell cap, or to glue a finding in to hold a pendant or to run a cord through. These wire drills and burrs are made in the United States.

Home Long Gemstone Beads IShort Beads I Amber & Necklaces I Bracelets I Earrings I Sterling Pendants Rosaries I Fossils I Copal I Polished Rock I Educational Kits I Bookends I Gold Specimens I Gallery Hearts I Septarians I Spheres I Eggs I Minerals I Gemstone Lights I Books I Plastic Stands I Other Stands Rock Tumbler Page I Grit and Accessories I Tumbling RockIRough Rock I Landscape Rock Lapidary Grinders ILapidary Saws IDiamond Blades I Agates I Findings I Clearance Shipping Information I History I Auctions I Pictures I Links

rock grinder, rock crusher | rock tools attachments, llc

ModelExcavator class (tons)Drum diameter (inch)(mm) Drum spacing (inch)(mm)Cut width (inch)(mm)Hydraulic flow (Gal/min)(L/min)Dimensions (Height x Width x Depth) (in)(cm)Weight (lbs)(kg) G105 - 15 16.544204.0610329.1374016-2960-11032 x 29 x 1880 x 74 x 46847381 G1512 - 20 16.934304.6511824.8063032-35120-13233 x 25 x 1883 x 63 x 461300585 G2018 - 30 25.596505.6314341.73106058-85220-32045 x 42 x 28115 x 106 x 7128891300 G3025 - 40 26.576755.6314345.47115585-122320-46046 x 46 x 28117 x 116 x 7030221360

Disclaimer: All information provided on Rock Tools Attachments Web sites are subject to change without notice, including the availability of products and services. While efforts have been made to make Rock Tools Attachments Web sites helpful and accurate, due to the open nature of sites, and the potential for errors in the storage and transmission of digital information, Rock Tools Attachments does not warrant the accuracy of information obtained from any Rock Tools Attachments Web site.

rock drill excavator attachments | tei rock drills

TEI rock drilling attachments are the most versatile excavator drilling platforms available for ground improvement, earth retention and rock drilling applications. Our patented system combines TEI drifters featuring Automatic Stroke Adjustment (ASA) or rotary heads with an advanced feed system that produces unequaled drilling technology for soil nailing, micropile and mining operations. The TEI Rock Drill Excavator Attachment is ideal for use in difficult low, high and confined environments. Its 360 swivel capabilities offer an extreme range of motion. The built-in swivel accepts air, water or grout for all types of drilling techniques. Additional drill positioning can be provided with the installation of a second 360-degree positioner that will move the drill feed from one side of the excavator boom to the other, enabling the drilling attachment to reach even the most difficult drilling positions.

TEI can reconfigure existing rock drills for use when longer strokes are required. Our extended attachment provides the longest stroke possible while still allowing the drill to be transported while attached to the excavator. The mast offers a 25 ft (7.6 m) stroke with a 15 ft (4.6 m) rod-adder. The rod-adder has a positive grip that keeps the drill rod or auger in place regardless of the drilling angle. The TEI Extended Excavator Rock Drill can install a 40 ft (12.2 m) soil nail or micropile with only one operator.

The TEI Rock Drill Excavator Attachment is ideal for use in difficult low, high and confined environments where its 360 swivel capabilities offers an extreme range of motion. Additional drill positioning can be provided with the installation of a second 360-degree positioner that will move the drill feed from one side of the excavator boom to the other.

excavator mounted rock drills,excavator drill attachment,excavator mounted rock drills,rock drilling tools,rock drill bits

If you are a contractor or end user in drilling & blasting, quarrying etc, you can see many Excavators with Hydraulic Breakers or other frontattachments working in drilling, digging,demolition,whichare everywhere not only in quarry andconstructionproject site, but you have very less budget to buy hydraulic top hammer drilling rig like Sandvik Tomrock DQ550 ( bench ), Q7 (quarrying). Atlas Copco Power OC (bench), Atlas Copco Boomer 282, L2D (Drifting and tunneling) Atlas copco ROC L8, ROC D7 (Bench)

ProDrill Excavator Mounted Drill Attachment can match toyour excavator with any brand,minimum 3 tons excavator as easy requirement for using ProDrill excavator mounted rock drill,ProDrillExcavatorDrillingRigseriesincludessixmodelsPD-28, PD-40, PD-45,PD-90,PD-115 coveringtheholediametersfrom30to115mm.Theuseoftheoptional drillrodsuchas Integral drill rods or tapered rods,threadedRods allows drilling holes up from 3 to 20meters deep. Inpractice, ExcavatorRockDrillsisareal drilling rigequippedwiththe3.2m3/minpistontypeorscrewtypeofaircompressortoflushingdustattimeofdrilling.

Excavator mounted rock drilling attachments are designed to be used in various job sites such as drilling and blasting, quarrying & Mining, rock bolting, rock and concrete demolition, construction works, etc.

Rock drill type PD-HC20 Impact Power 90J Impact Frequency 50Hz Impact Oil Pressure 14MPa Impact Capacity 45L/min Rotation Torque 200N.m Rotation Speed 150-300rpm Min. Propulsion Force 4KN Max Propulsion Force 7KN Oil Lube Air Consumption 0.02 M3/min Oil Lube Oil Consumption 6 drops/min Water Flow for waste elimination 30L/min Water Pressure for waste elimination 1.5MPa Drill Rods R25/R32 Drilling Diameter 32-51mm Max Depth of Single Drill Rod 4500mm Drilling Speed 0.6-1.2M/min Weight 70KG Excavator 15Tons

If you are a contractor or end user in drilling & blasting, quarrying etc, you can see many Excavators with Hydraulic Breakers or other frontattachments working in drilling, digging,demolition,whichare everywhere not only in quarry andconstructionproject site, but you have very less budget to buy hydraulic top hammer drilling rig like Sandvik Tomrock DQ550 ( bench ), Q7 (quarrying). Atlas Copco Power OC (bench), Atlas Copco Boomer 282, L2D (Drifting and tunneling) Atlas copco ROC L8, ROC D7 (Bench)

ProDrill Excavator Mounted Drill Attachment can match toyour excavator with any brand,minimum 3 tons excavator as easy requirement for using ProDrill excavator mounted rock drill,ProDrillExcavatorDrillingRigseriesincludessixmodelsPD-28, PD-40, PD-45,PD-90,PD-115 coveringtheholediametersfrom30to115mm.Theuseoftheoptional drillrodsuchas Integral drill rods or tapered rods,threadedRods allows drilling holes up from 3 to 20meters deep. Inpractice, ExcavatorRockDrillsisareal drilling rigequippedwiththe3.2m3/minpistontypeorscrewtypeofaircompressortoflushingdustattimeofdrilling.

Excavator mounted rock drilling attachments are designed to be used in various job sites such as drilling and blasting, quarrying & Mining, rock bolting, rock and concrete demolition, construction works, etc.

Rock drill type PD-HC20 Impact Power 90J Impact Frequency 50Hz Impact Oil Pressure 14MPa Impact Capacity 45L/min Rotation Torque 200N.m Rotation Speed 150-300rpm Min. Propulsion Force 4KN Max Propulsion Force 7KN Oil Lube Air Consumption 0.02 M3/min Oil Lube Oil Consumption 6 drops/min Water Flow for waste elimination 30L/min Water Pressure for waste elimination 1.5MPa Drill Rods R25/R32 Drilling Diameter 32-51mm Max Depth of Single Drill Rod 4500mm Drilling Speed 0.6-1.2M/min Weight 70KG Excavator 15Tons

excavator rock cutters rc | fae group

RC series machines are unstoppable rock-grinding attachments for all types of excavators. Tested in the most challenging environments and praised by our customers, these fixed-tooth hydraulic rock-crushing machines are capableof cutting through hard rock quickly and efficiently. This equipment is widely used in road construction, underground utility work, tunneling, trenching,mining, quarrying, the oil & gas industry, and much more. High-productivity combined with minimal noise and vibrations, make RC series a must-have rock grinding attachment for various applications.

Pursuant to current legislation and the provisions of Article 13 of EU Regulation 2016/679 of the European Parliament and the Council of Europe of 27 April 2016 dealing with the protection of natural persons with regard to the processing of personal data and the free circulation of said data (hereinafter "Regulation"), we inform you that the Data Controller of the data you have provided is FAE Group S.p.A. (hereinafter FAE) whose registered office is Unit 18| of the Zona produttiva I-38013 Fondo (TN) Tax Code and VAT no. 01942570225

Web browsing dataThe IT systems and software programs used for running this website collect certain personal data whose transmission is implicit in the use of Internet communication protocols (e.g. the IP addresses or domain names of the computers used by users who access the website, as well as the URI addresses -Uniform Resource Identifier - of the information requested, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server -success, error, etc.). and other parameters relating to the operating system and to the users IT environment. This information is not collected in order to be linked to identified data subjects, but by its nature could, through processing and association with data held by third parties, allow users to be identified.

The data is used for the sole purpose of obtaining statistical information not associated with any user identification data on the use of the website and to check that it is functioning correctly and is deleted immediately after processing. The data may be used to ascertain liability in the event of hypothetical computer crimes against the website.

However, any contact with FAE, or the discretionary, deliberate or spontaneous sending of messages, e-mails or conventional mail, to the FAE addresses indicated on this website will result in the subsequent acquisition of the address, including e-mail, of the sender or their telephone number, which are needed in order to respond to requests, as well as any other personal data included in their correspondence.

The processing of data for these purposes does not require your consent since it is necessary for the implementation of a contract to which you are a party or the implementation of pre-contractual measures taken at your request (Article 6, paragraph 1, letter b) of the Regulation), as well as, where applicable, to fulfil a legal obligation (Article 6, paragraph 1, letter a) of the Regulation).

The processing of the data will be carried out by personnel appointed by FAE using procedures, technical and IT tools intended to protect the confidentiality and security of your data and involves collecting, recording, organizing, storing, consulting, processing, modifying, selecting, extracting, comparing, using, linking, blocking, communicating, disseminating, deleting or destroying said data including a combination of two or more of the above activities. Your data will not be passed on to others.

Within the scope of its activities and for the purposes indicated above, FAE may use services provided by third parties acting on behalf of FAE and according to its instructions, as data controllers. These third parties provide FAE with processing or core services (e.g. IT services for the functioning of the site). You can request a complete and updated list of the persons appointed as data controllers by getting in touch with one of the contacts listed below.The data may be circulated within the European Union, where FAE or its suppliers are based or have their own servers in these countries. The data will not be circulated outside the European Union.FAE shall have the right, at any time, to exercise the rights provided for under current legislation, including the right to:

Purpose of processing We inform you that the personal data voluntarily provided by you will be processed by , as personal data controller, exclusively for the research and selection of personnel, for current and future open positions, via paper-based, electronic or telematic means, whichever is most suitable for guaranteeing the security and confidentiality of the related processed data.

Processing procedure Personal data will be processed mainly using IT equipment. Personal data that you voluntarily provide, either by filling in online forms or by spontaneous submission of your curriculum vitae, via the website of as part of the application process, will be stored in a data handling application of exclusively for the purposes indicated above, and for the period stipulated by the relevant legislation. For the purposes of this paragraph, undertakes to observe specific security measures to prevent the loss of data, its illicit or incorrect use and unauthorised access, in full compliance with the laws and regulations.

Compulsory/voluntary provision of data Personal data is provided voluntarily. However, the refusal of the interested party to provide personal data will make it impossible for the Data Controllers to process the data and, consequently, it will be impossible to evaluate the application and to proceed with a potential selection of the candidate.

Data Controller and Responsible Officer The Controller for the described processing activities is , with headquarters in . Processing operations will be carried out by Assignees appointed by the Data Controller and/or the Officer responsible for data processing, who operate under their direct authority in compliance with the instructions received.

Persons/bodies to whom/which personal data may be communicated, or who may access them in their capacity as Responsible Officers or data processing officers For the sole purpose of maintaining this website and the database containing personal data received, may use third parties that, in this way, may gain access to your data. In any case, these bodies guarantee the adoption of security and confidentiality criteria equivalent to those adopted by , and operate in the capacity of external data processing bodies.

Rights of the interested party The interested party has the right to obtain confirmation of the existence of his/her personal data, and of their communication, in an intelligible manner. The interested party has the right to know the content and the origin of the personal data. The interested party furthermore has the right to demand:

a) the updating, amendment, or, where he/she has an interest in it, the integration of the data; b) the deletion, anonymization or blocking of unlawfully processed data, including data that does not need to be retained for the purposes for which it was collected or subsequently processed; c) confirmation that those to whom the data is communicated or disclosed are notified of the actions referred to under points (a) and (b), including their content, unless the fulfilment thereof proves impossible or involves the use of means that are clearly disproportionate to the right being protected.

The interested party has the right to object, in whole or in part, for legitimate reasons, to the processing of personal data concerning him/her, even if it is pertinent to the collection purposes stated;