kano efficient large rotary kiln

rotary kilns

FEECO is a leading manufacturer of highly engineered, custom rotary kilns for processing solids. Our high temperature kilns have earned a reputation for their durability, efficiency, and longevity. We offer both direct- and indirect-fired units.

Rotary kilns work by processing material in a rotating drum at high temperatures for a specified retention time to cause a physical change or chemical reaction in the material being processed. The kiln is set at a slight slope to assist in moving material through the drum.

Direct-fired kilns utilize direct contact between the material and process gas to efficiently process the material. Combustion can occur in a combustion chamber to avoid direct flame radiation, or the flame can be directed down the length of the kiln.

All FEECO equipment and process systems can be outfitted with the latest in automation controls from Rockwell Automation. The unique combination of proprietary Rockwell Automation controls and software, combined with our extensive experience in process design and enhancements with hundreds of materials provides an unparalleled experience for customers seeking innovative process solutions and equipment.

Indirect-fired kilns are used for various processing applications, such as when processing must occur in an inert environment, when working with finely divided solids, or when the processing environment must be tightly controlled.

Calcination refers to the process of heating a material to a temperature that will cause chemical dissociation (chemical separation). This process is used frequently in the creation of inorganic materials, for example, the dissociation of calcium carbonate to create calcium oxide and carbon dioxide.

Thermal desorption is also a separation process. This process uses heat to drive off a volatile component, such as a pesticide, from an inorganic mineral, such as sand. The component is vaporized at the increased temperature, causing a separation without combustion. In some cases, an indirect rotary kiln would be best for this application, because the volatile chemicals may be combustible. The indirect kiln will supply the heat for desorption, without the material coming into direct contact with the flame.

Organic combustion refers to the treatment of organic wastes with the intent of reducing mass and volume. Organic waste is treated in the kiln, leaving behind an ash with considerably less mass and volume. This allows for more efficient and effective deposit of waste materials into landfills.

Sintering is the process of heating a raw material to the point just before melting. This increases the strength of the material, and is commonly used in the proppant industry, where sand or ceramic materials are made stronger.

Heat setting involves bonding a heat resistant core mineral with another, less heat resistant coating material. Unlike an unheated coating process, here, a rotary kiln heats the coating material to just below liquefaction point, allowing it to coat the heat resistant core more evenly and more securely. This process is commonly seen in the manufacture of roofing granules, where a mineral such as granite is coated with a colored pigment, producing a product that is both durable and aesthetically pleasing.

Reduction roasting is the removal of oxygen from a component of an ore usually by using carbon monoxide (CO). The CO is typically supplied by mixing a carbonaceous material such as coal or coke with the ore or by feeding it separately. Examples are the reduction roasting of a hematite containing material to produce magnetite that can be magnetically separated. In the Waelz process, zinc oxide in steel mill wastes is reduced to metallic zinc and volatilized for recovery in the off-gas system.

Thermal Desorption for Spent CatalystsRotary Kiln3D Indirect Kiln for Activated CarbonPyrolysis Kiln Seal3D FEECO Pyrolysis KilnPyrolysis KilnWorn Rotary Kiln RefractoryBatch Rotary Kiln TestingKiln Alignment SoftwareProcessing Challenges When Working with Rotary KilnsFEECO Batch Kiln BrochureIndustry Focus COVID-19 Demands Medical Waste Incineration CapacityIndirect Fired Rotary Kiln ReplacementRotary Kiln IncineratorsResource of the Week: Thermal Testing with Kilns3D Model of a FEECO Carbon Activation KilnRotary Kiln Testing ThumbnailRotary Kiln TestingIndirect Batch Rotary Kiln Testing, Batch Calciner Testing, Thermal Process DevelopmentKnowing When its Time to Replace Your Rotary Drum Seal, Leaf SealRotary Drum Drive ComponentsRotary Drum BreechingReplacement Rotary Drum BearingsBoomin Catalyst Market Drives Demand for Rotary Kiln Repair Services, Rotary KilnsReplacement Dryer (Drier) and Kiln BurnersCombustion ChambersReplacement Rotary Drum ShellRotary Drum Laser Alignment Process, Rotary Drum AlignmentWhy Post Maintenance Alignment is Critical to Rotary DrumsCauses of Tire (Tyre) and Trunnion Wear, Rotary Drum TireFEECO Tire (Tyre) Grinding Machine, Tire and Trunnion Grinding in ProgressRotary Drum Tire (Tyre) Wear Pattern from Excessive Wheel Skewing, Rotary Drum Tire in Need of Tire GrindingRotary Drum Tire (Tyre) Wear Pattern from Poor Housekeeping Practices, Rotary Drum Tire in Need of Tire GrindingRotary Drum Tire (Tyre) Wear Pattern from Misalignment, Rotary Drum Tire in Need of Tire GrindingRotary Drum Tire (Tyre) Wear Pattern from Using Improper Tire Lubricant, Rotary Drum Tire in Need of Tire GrindingTire (Tyre) and Trunnion Wheel GrindingTire (Tyre) and Trunnion GrindingIndirect Rotary Kiln (Calciner) for Plastics PyrolysisPlastic to Fuel Conversion via Pyrolysis Replacement Rotary Drum PartsRotary Drum Thrust RollersRotary Drum Trunnion Wheels (Rollers)Rotary Drum Riding Ring (Tire/Tyre)Resource of the Week: Girth Gears PageRotary Kiln System Optimization, Rotary Kiln Process AuditSpring-Mounted Replacement Rotary Drum Girth GearRotary Kiln Gains Traction as E-Waste Crisis Looms, Metal Recovery from E-WasteIndirect Batch Rotary Kiln Testing, Batch Calciner Testing, Thermal Process Development, Metal RecoveryDirect-Fired Rotary KilnRotary Kiln Chain and Sprocket Drive AssemblyRotary Kiln Gear and Pinion Drive AssemblyRotary Kiln Friction Drive AssemblyRotary Kiln Direct Drive AssemblyRotary Kiln Trunnion BaseRotary kiln end dam for increasing loading, retention time, and bed depthResource of the Week: Rotary Kiln Customization Slideshare PresentationKaolin Clay CalcinationLithium-ion Battery Recycling OpportunitiesRotary Kilns in Expanded Clay Aggregate ProductionBatch Kiln for Testing Expanded Clay AggregatesRotary Kiln Refractory Failure Illustration, Rotary Kiln Shell Hot SpotRotary Kiln Refractory InspectionDirect-Fired Rotary Kiln for SpodumeneCalciner (Indirect Kiln) for Lithium Recovery from SpodumeneRotary Kiln Complete SystemFEECO Batch Kiln for Testing CalcinationRotary Drum Drive BaseRotary Kilns for Advanced Thermal Processing in SustainabilityResource of the Week: Project Profile on a Rotary Kiln (Calciner) Resource Recovery SystemResource of the Week: Tire Grinding BrochureResource of the Week: Slideshare Presentation on Rotary Kiln Sizing and DesignResource of the Week: Unitized Drive Base BrochureDiagram Showing a Rotary Kiln with Co-current AirflowDiagram Showing a Rotary Kiln with Counter Current AirflowDiagram Showing Co-current Airflow View All >

The advantages to a FEECO rotary kiln are that it is built to the highest quality standards and is backed by over 60 years of process design experience. The FEECO Innovation Center offers batch and pilot scale kilns that can simulate conditions in continuous commercial rotary kilns, allowing our customers to test small samples of material under various process conditions, as well as part of a continuous process. With options in both co-current and counter-current flow, and direct or indirect configurations, the FEECO test kilns offer a variety of options to suit your thermal testing needs. We also offer support equipment such as a combustion chamber, afterburner, baghouse, and wet scrubber for testing.

excellent sponge iron kiln to deal with your sponge iron kiln process

Today we will introduce a device that is popular with userssponge iron kiln. Sponge rotary kiln is a device for producing sponge iron. It has a reasonable structure, stable performance, and simple operation.

large capacity kilns - industrial

Olympic Kilns builds affordable, powerful electric and gas kilns for industrial, commercial and production volume use. These models handle large capacity loads with ease, fire to high temperatures cone 10, 2350F, and are extremely durable and long lasting. Our Industrial gas and electric kilns have many outstanding features including design options of top or front loading, or car loading with a removable floor and door for convenient loading and unloading.

The frames of the Large Capacity gas and electric kilns are built of heavy angle iron and metal tubing. Kiln walls are 4 thick constructed ofinsulating brick, 1 ceramic fiber board and 1 air space created by the tube frame. The design results in an energy efficient kiln with a cooler surface and outside temperature.Olympics Large Capacity gas and electric kilns have double insulated floors consisting of brick and ceramic fiberboard. The binder in the ceramic board insulation will emit an odor during the first firing. This is normal and will not occur after the kiln has been fired for the first time.

Front-loadingelectric kiln styles are built with door elementsand are installed in a 4 thick brick wall and backed with 1 x 1 steel tubing and 1 ceramic fiberboard.Ceramic fiber surrounds the brick insert in the door and provides a tight seal between the opening and the body of the kiln. The lids of the top loading models are comprised of pyro-brick modules and a counter-sprung lid for easy opening and closing of the kiln lid. Large Capacityelectric kilns are equipped with heavy gauge elements and industrial mercury relays for longevity. These heavy duty models come equipped with hinged electrical boxes and are equipped with their own breaker boxes for easy access, safety and lockout.

The roofs of the DownDraft gas kilns are designed with bolt-in pyro-block modules for energy efficiency and easy repairs. Olympic DownDraft gas kilns are built with high efficiency venturi burners located underneath the kiln chamber and have the option ofplacing the burners on the side of the kiln chamber when the kiln is under construction.Forced air burners are an available option.

modern, efficient pre-heater rotary kilns

We produce lime on two modern and efficient pre-heater rotary kilns. Our kiln system is fully automated and computer-operated which allows us to produce the highest quality lime in the industry. Combined with our product sizing, handling, and storage system we are able to segregate a variety of lime products in different sizes and chemistries. We can supply the specific lime you need for your application.

Limestone is fed into the kiln stone bin by conveying equipment from our on-site quarry. Gravity feeds stone from the bin through chutes into the pre-heater. As hot gas from kiln fuel combustion is drawn through the pre-heater, heat is transferred to the stone to start the calcination process. Calcination is the process by which limestone is heated to chemically convert the stone to lime. Stone and fuel run countercurrent to each other with stone originating on one end and exiting the other end as lime. Kiln fuel is combusted on the lime discharge end of the kiln and hot gases are exhausted on the end of the kiln where the stone enters the process.

After heating and partial calcining in the pre-heater, the stone is discharged by a hydraulic ram to the pre-heater discharge opening. Gravity causes the stone to flow from the pre-heater, through the transfer chute, into the kiln. The high temperatures found in the kiln complete the calcination process that began in the pre-heater.

Through calcination the limestone has been converted to burnt lime. Lime gravity flows from the kiln into the cooler where a bed of hot lime is formed. Ambient air is blown from louvers at the bottom of the bed through the bed of hot lime. As the hot lime cools the incoming ambient air, which becomes combustion air, is heated which increases the efficiency of the process.

The benefits of the pre-heater rotary kiln are in the high recovery of heat throughout the system. Heat that would typically be wasted is used to pre-heat stone and combustion air to make a highly efficient process. Other benefits include lower SOx and NOx emissions to the environment, reduced fuel consumption, and superior product quality.

rotary kilns for calcining and roasting | flsmidth

Calcining and roasting is an intense process that involves high temperatures, heavy loads and significant thermal stresses. Finding the right rotary kilns that will consistently withstand the pressure is the key to running an efficient and profitable operation.

When unproven processes are required or calcinations of unusual materials are desired, FLSmidth can help with an excellent Research and Development Group and with well-equipped pilot plant facilities, including a 0.5m x 5m test kiln and a 1m x 10m test kiln. Also available are crushing and grinding machines, muffle furnaces, a complete wet and dry chemical lab, and other facilities to support this activity. For more information, call or email the FLSmidth office nearest you.

FLSmidth provides sustainable productivity to the global mining and cement industries. We deliver market-leading engineering, equipment and service solutions that enable our customers to improve performance, drive down costs and reduce environmental impact. Our operations span the globe and we are close to 10,200 employees, present in more than 60 countries. In 2020, FLSmidth generated revenue of DKK 16.4 billion. MissionZero is our sustainability ambition towards zero emissions in mining and cement by 2030.