mine equipment list

list of mining equipment | career trend

According to the Bureau of Labor Statistics, the mining industry consists of five major segments: coal mining, gas and oil extracting, metal ore mining, non-metal mineral mining and supporting activities such as resource transportation. Each segment requires the use of specific equipment, but there are several types of mining equipment that are used throughout the industry. This equipment includes excavators, draglines, drills, roof bolters, continuous miners, longwall miners, rock dusters, shuttle cars and scoops.

Miners traditionally used shovels and steam shovels to break and remove earth, but todays miners rely on excavators. An excavator is a mobile vehicle that moves on tracks or with standard wheels. It features a rotating platform, off of which comes a hinged arm with a bucket or scoop attached to its end for digging.

Draglines are enormous earth moving machines that miners use to drag away dirt and expose underlying coal or mineral deposits. Draglines are some of the largest machines on the planet, and can remove several hundred tons of material in a single pass, according to Kentucky Coal Education.

Miners who extract natural gas and oil commonly rely on drills to reach underground deposits before piping the resources to the surface. Coal and mineral miners also use drills to create extensive series of holes, which they then fill with explosive charges to blast away chunks of earth.

Continuous miners are machines with massive, rotating arrays of teeth, often made from tungsten carbide. Subterranean coal miners use the machines to scrape coal from coal beds. In particularly dangerous situations, workers control robotic continuous miners remotely.

In contrast to continuous miners, longwall miners remove large, rectangular sections of coal instead of scraping coal from a bed bit-by-bit. According to Kentucky Coal Education, continuous miners consist of a series of large cutting shearers and a self-raising hydraulic system that supports the mineshaft ceiling as sections of coal are removed.

Coalminers use electric-powered shuttle cars to transport coal from the coal bed to safer points in the mine. From there, miners can use standard scoops, or haulage vehicles, to drive their loads completely out of the mine. Miners of all types use haulage vehicles for various tasks.

Erik Devaney is a writing professional specializing in health and science topics. His work has been featured on various websites. Devaney attended McGill University, where he earned a Bachelor of Arts in humanistic studies.

mining equipment | mining equipment

Mining Equipment specializes in rail mounted equipment. We have a very large inventory of diesel, battery and trolley locomotives in stock. Various models by Plymouth, Clayton, Brookville, Schma, Goodman, Greensburg and General Electric can be offered. In addition to locomotives, we also have a large inventory of rolling stock such as muck cars, flat cars and mantrips. Mining Equipment also builds new rolling stock to meet our customers needs.

Our ventilation division, Jetair Axiflow Fans, offers a full range of underground ventilation fans and accessories. We now offer our Super-Silenced fans which run quieter and take up less space than conventional fan and silencer combinations. To compliment our fans, we also offer steel ventilation ducting, rolled on-site for your mine or tunnel.

Mine Hoists International is a fully-owned subsidiary of Mining Equipment. Based in North Bay, Ontario, Mine Hoists boasts a large selection of used mine hoists and stage winches. We have more than 35 mine hoists and 60 stage winches, up to 80,000 lbs. capacity.

Mining Equipment is North Americas exclusive agent for Metalliance. Metalliance is the world leader in the design and production of tunnel multi-service vehicles. Mining Equipment is also the exclusive agent for Trident SA (Goodman, Eimco) in the United States. Trident manufactures Goodman battery locomotives in South Africa as well as Eimco over-shot muckers.

gold mining equipment

911MPE hassmall gold mining equipment for sale andmore specifically mineral processing equipment. Our equipment is best used in small scale extractive metallurgyoperations operated by small miners or hobbyist prospectors and mining fanatics. 911MPE offers gold mining equipment as well as processing equipment applicable to most any base metals: copper, lead, zinc, nickel, tin, tungsten and more. For the relatively small size of equipment offered, sample preparation and metallurgical laboratories can economically buy good alternatives to the usually unaffordable equipment for sale in the classic market place.

911MPE has for target market what mining professionals consider the pilot-plant scale mining operation or artisanal mining operations with a focus around under 500TPD. Metals you can extract include: gold, silver or other of the precious group as well as the classic base metals; copper, lead, zinc, nickel, molybdenum. Much of our ultra-small scale equipment allows you to process from just a few kilo (pounds) per day and work on your passion for a small budget.

You can buy from us mineral processing equipment starting from crushing, grinding, classification, dredging, gravity separation, flotation, pumps, water treatment and smelting. A line of ovens, furnaces and laboratory equipment is also available.

Making a complete list of gold mining equipment starts with defining the type of gold mining you are doing and the budget you have at your disposal. The type of mining relates to hard rock,eluvial, or placer; alluvial deposits. The capital budget you have to invest in buying your equipment with dictate the scale at which you want to mine and influence the long-term operating costs of your mining operation.

Since most of the information online provides lists of gold mining equipment for amateur level mining with equipment like: gold pans, metal detectors, mini sluice box, blue bowl, geologist rock pick, soil scoop, hand screens/classifiers. The items listed just now fall closer to gold prospecting tools and equipment than actual mining.

I will present here what I consider are major equipment lists for 3 types of mining operations. Remember now, a metallurgist is writing. This will not be flawless and since my speciality is process equipment, that is mostly what will be discussed.

Some amateur level gold prospecting equipment such as metal detectors are often classified as mining equipment by small miners/prospectors operating as a hobby. These items include but are not limited to:

welcome to mine equipment & design

Dont forget: WE KNOW CRUSHING AND SCREENING! No matter what specific type, style, model or brand of equipment you are seeking components, we will find it for you and provide unsurpassed service at highly competitive pricing.

Mine Equipment and Design, LLC based in Ross, Ohio has been growing and successfully serving the aggregate and mining industry since 2004. We are the KPI-JCI dealer for Ohio, Kentucky and several regions of Indiana. In addition, we have widespread coverage of numerous other components that the industry requires on a daily basis. We provide ALL wear part consumables for ALL styles of crushers, dredge pumps, screening media and conveyors of all sizes. We can also provide numerous specialty products to improve wear rates and offer a variety of metallurgy or materials to suit your needs. Refer to the complete list of brands MED is associated with on the Product Lines page. MED is your one stop dealer for all parts and equipment related to processing Crushed Aggregates, Sand and Gravel, Coal, Slag and Recycled Concrete and Asphalt. read more

mining 101: ultimate list of gold mining equipment - precious metal info

Found in Bulgaria are some of the oldest gold artifacts known to mankind, in the Varna Necropolis, a collection of graves built between 4700 and 4200 BC. This finding, dating back nearly 7000 years, provides evidence of the first civilization to use gold mining equipment. Some archeologists claim the Sakdrisi site in southern Georgia, which dates to roughly 4000 BC, is the worlds first gold mine.

In the 19th century, gold rushes occurred around the globe and people migrated to different regions hoping to strike it rich. The Victorian Gold Rush took place in Victoria, Australia, between 1851 and the late 1860s, and the Second Boer War took place in South Africa between 1899 and 1902. In America, the famous California Gold Rush took place in 1949, and discovery of Nevada's Carlin Trend,North America's largest gold depository,took placein 1961.

Since the beginning of civilization, humans have mined around 6 billions troy ounces of gold. Today, 2.5 percent of all gold production happens in Nevada, making it one of the primary regions on earth. As of 2017, China produced the most gold per year at 429 metric tons, followed by Australia, and then Russia. However, there's still a lot of gold out there, and you can join in the gold mining industry by investing in basic gold mining equipment.

There are two basic steps to gold mining: prospecting and production. "Prospecting" refers to the actual search in a certain area for valuable minerals, and "production," also known as mining, is the physical act of removing the gold from where you found it. Since different equipment exists for prospecting and mining, this article explores, briefly, equipment used for prospecting, and then focuses, primarily, on gold mining equipment.

How do you find gold? In the gold mining industry, theres a lot of value in learning from others who have gone before you. No one ever gets all the gold out of any one location. So, try going to where gold exists in abundance. Consider this: the California Gold Rush only removed a small percentage of the gold thats out there. That's right.

There are areas in California that are still open to recreational prospecting, including the Auburn State Recreation Area and the South Yuba Recreation lands. Once you get your feet wet in an area proven to have gold, you can move on to other areas closer to home. After mastering prospecting and gold-mining techniques, you might even want to look for gold in your own back yard.

Some people say, Gold is where you find it. What this means is you have to learn what to look for. First, understand that the way water moves in rivers and streams determines where gold deposits might settle. Next, you need to learn why gold concentrates in certain areas, and then search those areas.

Once youve selected a specific waterway for mining, youll want to pick specific points to search. Since it is impractical to search the entire stream or river, there are ways to read a waterway to determine the most likely places to find gold. The following describes how to find those places.

The first thing to know is gold is heavy. Its about 19 times heavier than the same amount of water and 6 times heavier than solid material found in streams and rivers. So, anything that slows the movement of water is likely to trap gold deposits. Things that slow down moving water are:

Water on the downriver side of obstacles will move slower, and this is where heavier gold will settle. When looking at a chosen waterway, begin by searching for natural dams where gold may have collected. Another place that collects heavier objects in a waterway is inside bends, places where water naturally slows down. Heavy objects will often form a bar at these points, and the upside of a bar inside bends is a great place to look for gold.

Once gold has settled in a stream, over time, it works its way down layers of soil and settles in bedrock. A great location for gold is in the material coating bedrock under a stream. Choose a location on the inside a bend where there is an obstruction and then dig to the bedrock. Sifting the soil coating bedrock, usually, will produce gold.

Learn to delay the excitement of seeing gold for the first time and you will have more gold-filled dirt to take home with you. Once you get better at choosing locations, and especially if you find a proven location, its best to spend your time digging and removing dirt, rather than sifting and cleaning it on site. Delay celebrating and get as much dirt as possible to take home. Once you get home, sift and clean the gold youve found.

Another great place to look for gold is in tall grass growing above an inside bend. Grass acts like a sieve and the largest gold pieces end up at the roots of grass. They often call this kind of gold oat gold. The pieces might be smaller than gold found in other places, but there could be a lot.

If you want to invest a little in your endeavor, you can purchase a metal detector designed to find gold. This gold mining equipment can cut down on the time spend hunting, but a mid-level detector can cost about $600.

When considering getting involved in gold prospecting and mining, make sure you learn and follow the rules. There are certain places where prospecting is legal and others where it is not. Many prospecting clubs exist and joining one can help ensure you are following rules. For examples, most sites require that you refill any holes you have dug, and that you do not destroy local plant life. Learn the rules before you head out with your gold mining equipment.

Once youve finished prospecting and have a location where you know there is gold, you will need gold mining equipment. What you use will depend on the size of your operation. If you are working in the gold industry, you will have industrial gold mining equipment. If you are mining on your own as a hobby, youll need smaller, personal gold mining equipment. Lets look at both.

If you want to use industrial mining equipment, make sure you have the proper training. If working for a business, they should provide needed training. However, if you purchased industrial gold mining equipment for a personal claim, be certain you know what you are doing. Safety should always come first.

Miners use drills for underground mining to create access holes for descending underground, or to place explosive charges to bring material to the surface. The drill miners choose depends on how and what is being mined.

Blasting tools create an explosion to blast away chunks of material to access minerals. Blasting can also remove chunks of unwanted materials that are keeping other machines or people from getting to a seam of wanted materials. In underground and open pit mines, miners use both drilling and blasting tools, often together. They use drills to place blasting tools at the right depth and in the right place.

Earth-moving machines move around large amounts of materials. They might haul material after blasting, move other materials allowing access to seams of minerals, dig underground mines, or get down to the bedrock where minerals might exist.

Crushing equipment moves materials around an underground mine. Miners use this equipment to keep the flow of materials going at an efficient rate, and to save money. It is easier to remove crushed rocks rather than heavy chunks, so crushing equipment saves time and effort.

A sluice box is a way to sift through raw material more quickly. Essentially, its automated panning. These machines used to be large and heavy in the early days of panning, but are now lightweight and easier to use. If youre serious about mining, they are worth checking out.

A higher quality sluice box, high banker boxes have a water pump allowing more material to move through faster. These boxes recycle water so you dont have to rely on water flow in the river. They recover more gold than basic models.

If you arent going into the professional gold mining industry, but are looking for a hobby or a part-time job to bring in a little extra money, consider joining a mining club to help you once you begin your prospecting journey. The club will help you learn about personal gold mining equipment, but, for now, lets take a quick look at what you will need.

There are lots of different sizes, colors, and options in gold pans. Essentially, a 14-inch plastic pan is the best size, by far. Color does not matter, however gold shows up better in black. Black sand shows up better in blue or green. There are many new kinds of pans, but a basic pan with sharp, undercut riffles is all you need. Make sure the bottom of the pan is as wide as possible to catch more gold.

You will need a place to store the gold you find. All you need is a waterproof container you can close tightly, such as a 35mm film container. You can purchase containers on the internet, specifically made for holding gold.

The last thing to consider is investing in Gold Lab, a personal system that recovers gold from the concentrate you have refined. A good gold panner can get most of the gold from refined dirt, but a Gold Lab kit will allow you to further refine and recover 100% of your gold.

Once you have your equipment, its time to get in the river to pan for gold. This simple technique mimics what the river does naturally. You recover material, or dirt and place it in the pan, from a river location where you think there might be gold. Then, you shake it in a left-to-right motion underwater to sweep away light materials while causing heavier materials to go to the bottom of the pan.

Take the pan with the riffles on the far side and shake it, vigorously, left and right. This breaks up materials sending heavier items to the bottom. Do not slosh water out of the pan. If you need to, repeat the previous step and break up larger chunks again.

Continue shaking the pan back and forth and keep removing the top layer of lighter materials until you are down to only the heaviest materials, such as coins, BBs, old bullets, buckshot, nails, garnets, black iron rocks and black sand. You should now be able to see gold in the pan when shaking and tilting it forward slightly.

Use a magnet to remove black sand and other metal objects. Keep removing things until only gold remains. Remove the larger gold pieces and save any leftover concentrate. Let it sit for a while so you can recover any remaining pieces of gold that settle.

If you have enjoy the outdoors, and have just a little ambition, you can make a hobby out of gold prospecting and mining. All you need are basic tools that as your gold mining equipment and the willingness to do a little research. Once you decide where to go, or join a mining club to help you find locations, pack up your tools and prospect. It may take practice at panning before you find anything, but once you do, youll love the feeling of satisfaction and discovery. If you find you enjoy the hobby, invest in semi-professional gold mining equipment and see if you can up the amount you discover. Even if you only discover a few flakes, prospecting can be a great way to make new friends, learn about the gold industry, and understand a little about gold prospectors of old. Its an inexpensive hobby, so grab basic gold mining equipment and get started today.

911MPE has for target market what mining professionals consider the pilot-plant scale mining operation or artisanal mining operations with a focus around under 500TPD. Metals you can extract include: gold, silver or other of the precious group as well as the classic base metals; copper, lead, zinc, nickel, molybdenum. Much of our ultra-small scale equipment allows you to process from just a few kilo (pounds) per day and work on your passion for a small budget.

equipment you'll find at a typical surface mine - vector solutions

All of the terms, definitions, and images in this article come from our online MSHA Part 46 Typical Equipment in a Surface Mine training course. Weve included a short sample of that online mining safety course below.

Either track-mounted or tire-mounted, backhoes are a type of excavator equipped with a bucket that faces toward itself. The typical backhoe design incorporates an inward-facing bucket affixed to an articulated arm, or boom. Backhoes are often used for removing and loading overburden as well as scraping down high banks and digging ditches.

Bins and hoppers are containers with open tops for material to enter and an opening at the bottom for material to exit, typically over a conveyor or feeder. They are filled from the top by a loader or conveyor and discharge material at a continuous rate through the opening at the bottom for distribution to other processing and sorting operations.

Feeders transport material a short distance at a consistent rate using conveyor belts or screw conveyors. Feeders may also have an integrated breaker mechanism used to reduce material size as needed for the next processing stage.

Management offices, workshops, storage, refueling, and power generation may all be located on-site. In some cases, a control tower may also be constructed to offer a complete view of processing operations.

Some of the most common types of classifiers are spiral and rake classifiers. Both of these classifiers separate material by dragging the material along the bottom of an inclined surface in a settling chamber from the bottom (inlet) to the top (discharge).

Cone crushers are typically used in downstream crushing operations for medium-sized materials. Like the jaw crusher, the material is fed into the cone crusher from the top and discharged at the bottom. As the material enters the crusher, an eccentrically rotating cone forces the materials against a crushing plate. The shape and movement of the cone progressively reduces the size of material as it moves down through the crushing chamber to the sizing gap above the discharge opening. Resized material may be further sorted and transported to stockpiles or other processing operations.

Draglines, a type of specialized excavation equipment, operate by casting a heavy cable-hung bucket outward from a crane-like boom and dragging the bucket toward itself to remove large amounts of overburden, load ore, and manage stockpiles. Draglines can be equipped with buckets of specific design and weight to match the materials being mined.

Dredges are a type of excavation equipment used to remove material from underwater. They can be land-based or barge-mounted and may employ powerful suction or physical digging methods to bring material to the surface for removal or processing.

Front-end loaders, or simply loaders, are large, typically tire-mounted vehicles with a deep, wide bucket mounted at the front. Loaders are used to load mined material into haul trucks and feeders, push or dump overburden, and manage stockpile or refuse areas. In sand and gravel operations, loaders may also be used for excavation.

Surface mines require the constant operation of heavy equipment consuming large volumes of liquid fuel. Since much of this equipment is not designed to be driven on conventional roadways, refueling must be done on-site making fuel tanks and pumps a necessity. Tanks may be above or below ground and can range in size from 500 to many thousands of gallons.

Active mining operations are often spread across a large area, making walking to distant locations impractical and potentially dangerous. Miners, contractors, and supervisors often need to move quickly between work areas to do their jobs, perform maintenance, and address issues as they arise. A broad range of common passenger vehicles and pickup trucks may share haulage roads to transport people, tools, and small equipment where they are needed.

In-pit belt conveyors are used to move material within a large, active mining pit area or from the pit to loading areas for further distribution within the mine. In-pit conveyors may also move mined material to portable crushing systems that reduce the size of larger rocks or minerals for easier transport.

Jaw crushers are often used early in the production process to prepare material for processing. Raw mined material enters the top of the machine where a moveable jaw opens and closes repeatedly to break the material against a fixed stationary plate. When the material has been reduced to a size small enough to pass through the opening below the jaws, it exits the crusher and may be further sorted for stockpiling or downstream processing.

Most mines will have a maintenance and repair shop onsite to store replacement parts, supplies, tools, and other specialized machinery while providing sufficient space to maintain and repair equipment.

Overland belt conveyors are used on mine sites where there is the need for continuous movement of high volumes of material over long distances, in some cases, several miles. This type of bulk material handling conveyor may be used to transport material from the pit to processing areas or loading areas for rail or barge transport.

Scrapers are a type of earthmoving machine with an open, centrally mounted hopper or bowl with a blade-like leading edge that can be raised or lowered hydraulically to selectively remove and spread overburden over level or relatively level terrain.

Screw conveyors use a rotating, helical screw to move liquid or granular materials through a tube or trough. The screw is commonly referred to as a flighting and may either wrap in a spiral pattern around a central shaft or be shaftless.

Shovels, sometimes called power shovels, are versatile excavation machines, often track-mounted, with a large, outward-facing bucket at the end of a powerful, articulated boom that can rotate 360 degrees. Shovels are used primarily to dig out and remove overburden as well as selectively load material for transport.

Often tire-mounted, skid steers are quick, compact, highly maneuverable, and extremely versatile machines which perform a broad range of vital duties throughout the mine. They may be used in excavation work to carry, spread, and load loose material as well as serve an array of grading, site preparation, construction, demolition, and repair functions.

Track haulage involves the loading and management of specially designed railroad cars to transport enormous volumes of overburden or mined material to other areas of the mine or off-site to distant locations.

Since mining operations exist for the purpose of selling extracted and processed commodities, industrial truck scales are put in place to keep track of transported material volumes. Truck scales are normally situated on drive paths close to where over-the-road trucks exit the mine carrying processed material to customers.

Water reclamation systems remove fine sediments and return a high percentage of the used water back into the mining process. These systems may involve large settling tanks, mud presses, storm water discharge areas, and extensive piping and pumps to reduce runoff, manage environmental impact, and conserve resources.

Weve taken these terms and definitions and have put them together in a multimedia, interactive surface mining equipment glossary. Its cool, and theres even a way for you to download the interactive glossary for free. Go check it out.

Knowing the equipment at a surface mine will help you know whats what and get the job done. Especially if youre a brand new worker or a contractor whos been hired to work at a mine site. So we hope you found some value in this article.

Jeff Dalto, Senior Learning & Performance Improvement Manager Jeff is a learning designer and performance improvement specialist with more than 20 years in learning and development, 15+ of which have been spent working in manufacturing, industrial, and architecture, engineering & construction training. Jeff has worked side-by-side with more than 50 companies as they implemented online training. Jeff is an advocate for using evidence-based training practices and is currently completing a Masters degree in Organizational Performance and Workplace Learning from Boise State University. He writes the Vector Solutions | Convergence Training blog and invites you to connect with him on LinkedIn.

about us | mining equipment

We are happy to welcome innovative German manufacturer Mhlhuser to the Mining Equipment family. This important acquisition represents our first step into the European market, and we are excited for the opportunity to do what we do best: give contractors the best support in the industry, one project at a time.

Mining Equipments first European office, in Breuberg, Germany, will coordinate our expanded supply of locomotives, rolling stock, mine hoists, mine winches, and ventilation equipment in the new market. This offering will be enhanced by Mhlhusers bold designs, engineering depth, and regional experience. Mhlhusers Paul Zeder will head up operations at the new facility, and fellow Mhlhuser veteran Marco Langnickle will be our design engineer.

Over the years Mining Equipment has acquired several companies in the mining and tunneling industries, adding to its capabilities while maintaining its quality and commitment to a high level of customer service. Mining Equipment designs and manufactures all new machinery it offers.