process of manganese ore dressing about gold flotation cell

extraction of gold, gold extraction process, gold ore processing - xinhai

[Introduction]: Flotation is widely used in gold processing. In China, 80% rock gold is processed by flotation. Flotation process maximizes the enrichment of gold into sulfide minerals. The tailings can be directly discharged. Flotation in gold mine has low beneficiation cost.

For the gold wrapped in sulfide minerals, sulfide ore reaches monomer dissociation; but for the gold with gangue, grinding fineness should reach gold monomer dissociation. Grinding fineness of minerals is determined by test.

gold flotation

Though the gold recovery methods previously discussed usually catch the coarser particles of sulphides in the ore and thus indirectly recover some of the gold associated with these and other heavy minerals, they are not primarily designed for sulphide recovery. Where a high sulphide recovery is demanded, flotation methods are now in general use, but in the days before flotation was known, a large part of the worlds gold was recovered by concentrating the gold-bearing sulphides on tables and smelting or regrinding and amalgamating the product.Though the modern trend is away from the use of tables, because flotation is so much more efficient.

The flotation process, which is today so extensively used for the concentration of base-metal sulphide ores and is finding increased use in many other fields. In1932flotation plants began to be installed for the treatment of gold and silver ores as a substitute for or in conjunction with cyanidation.

The principles involved and the rather elaborate physicochemical theories advanced to account for the selective separations obtained are beyond the scope of this book. Suffice it to say that in general the sulphides are air-filmed and ufloated to be removed as a froth from the surface of the pulp while the nonsulphide gangue remains in suspension, or sinks, as the expression is, for discharge from the side or end of the machine.

For more complete information reference is made to Taggarts Hand book of Mineral Dressing, 1945; Gaudins Flotation and Principles of Mineral Dressing; I. W. Warks Principles of Flotation; and the numerous papers on the subject published by the A.I.M.E. and U.S. Bureau of Mines.

Flotation machines can be classed roughly into mechanical and pneumatic types. The first employ mechanically operated impellers or rotorsfor agitating and aerating the pulps, with or without a supplementary compressed-air supply. Best known of these are the Mineral Separation, the Fagergren, the Agitair, and the Massco-Fahrenwald.

Pneumatic cells use no mechanical agitation (except the Macintosh, now obsolete) and depend on compressed air to supply the bubble structure and tohold the pulp in suspension. Well-known makes include theCallow and MacIntosh (no longer manufactured) the Southwestern, and the Steffensen, the last, as shown in the cross-sectional view in Fig. 47, utilizing the air-lift principle, with the shearing of large bubbles as the air is forced from a central perforated bell through a series of diffuser plates.

The number and size of flotation cells required for any given installation are readily determinedif the problem is looked upon as a matter of retention time for a certain total volume of pulp. The pulp flow in cubic feet per minute is determined from the formula

For ordinary ratios of concentration the effect on cell capacity of concentrate (or froth) removal can be neglected, but where a high proportion of the feed is taken off as concentrates, or where middlings are removed for retreatment in a separate circuit, due allowance should be made for reduced flow and, in consequence, increased detention time toward the tail end of a string of cells. Not less than a series of four cells and preferably six or more cells should be used in any roughing section in order to prevent short-circuiting.

It is not intended here to discuss the subject of flotation reagents in anydetail. The subject is a large one with a comprehensive technical and patent literature. Research leading to the development of new reagents and to our understanding of the mechanism involved has been largely in the hands of academic institutions and the manufacturers of chemical products.

Recent work reported by A. M. Gaudin on the use of Radioactive Tracers in Milling Research described, for instance, the use of a flotation reagents containing radioactive carbon to determine the extent of collector adsorption. The bubble machine devised to measure the angle of contact of air bubbles on collector-treated mineral surfaces has been extensively used for determining the theoretical value of various reagents as flotation collectors, but for the most part the actual reagent combination in use in commercial plants is usually the result of trial-and-error methods.

The following is a brief discussion of the reagents ordinarily used for the flotation of gold and silver ores prepared from notes submitted by S. J. Swainson and N. Hedley of the American Cyanamid Company.

Conditioning agents are commonly used, especially when the ores are partly oxidized. Soda ash is the most widely used regulator of alkalinity. Lime should not be used because it is a depressor of free gold and inhibits pyrite flotation. Sodium sulphide is often helpful in the flotation of partly oxidized sulphides but must be used with caution because of its depressing action on free gold. Copper sulphate is frequently helpful in accelerating the flotation of pyrite and arsenopyrite. In rare instances sulphuric acid may be necessary, but the use of it is limited to ores containing no lime. Ammo-phos, a crude monoammonium phosphate, is sometimes used in the flotation of oxidized gold ores. It has the effect of flocculating iron oxide slime, thus improving the grade of concentrate. Sodium silicate, a dispersing agent, is also useful for overcoming gangue-slime interference.

Promoters or Collectors. The commonly used promoters or collectors are Aerofloat reagents and the xanthates. The most effective promoter of free gold is Aerofloat flotation reagent 208. When auriferous pyrite is present, this reagent and reagent 301 constitute the most effective promoter combination. The latter is a higher xanthate which is a strong and non-selective promoter of all sulphides. Amyl and butyl xanthates are also widely used. Ethyl xanthate is not so commonly used as the higher xanthates for this type of flotation.

The liquid flotation reagents such as Aerofloat 15, 25, and 31 are commonly used in conjunction with the xanthates. These reagents possess both promoter and frother properties. When malachite and azurite are present, reagent 425 is often a useful promoter. This reagent was developed especially for the flotation of oxidized copper ores.

The amount of these promoters varies considerably. If the ore is partly oxidized, it may be necessary to use as much as 0.30 to 0.40 lb. of promoter perton of ore. In the case of clean ores, as little as 0.05 lb. may be enough. The promoter requirement of an average ore will usually approximate 0.20 lb.

The commonly used frothers are steam-distilled pine oil, cresylic acid, and higher alcohols. The third mentioned, known as duPont frothers, have recently come into use. They produce a somewhat more tender and evanescent froth than pine oil or cresylic acid; consequently they have less tendency to float gangue, particularly in circuits alkaline with lime. The duPont frothers are highly active frothing agents; therefore it is rarely necessary to use more than a few hundredths of a pound per ton of ore.

When coarse sulphides and moderately coarse gold (65 mesh) must be floated, froth modifiers such as Barrett Nos. 4 and 634, of hardwood creosote, are usually necessary. The function of these so-called froth modifiers is to give more stable froth having greater carrying power.

The conditioning agents used for silver ores are the same as those for gold ores. Soda ash is a commonly used pH regulator. It aids the flotation of galena and silver sulphides. When the silver and lead minerals are in the oxidized state, sodium sulphide is helpful, but it should not be added until after the sulphide minerals have been floated, because sodium sulphide inhibits flotation of the silver sulphide minerals.

Aerofloat 25 and 31 are effective promoters for silver sulphides, sulphantimonites, and sulpharsenites, as well as for native silver. When galena is present, No. 31 is preferable to No. 25 because it is a more powerful galena promoter. Higher xanthates, such as American Cyanamid reagent 301 and amyl and butyl xanthates, are beneficial when pyrite must be recovered. When the ore contains oxidized lead minerals, such as angle-site and cerussite, sodium sulphide and one of the higher xanthates may be used. In some instances reagent 404 effects high recovery of these minerals without the use of a sulphidizing agent.Silver ores require the same frothers as gold oresviz., pine oil, cresylic acid or duPont frothers.

Aero, Ammo-phos, and Aerofloat are registered trade-marks applied to products manufactured by this company. The Great Western Electro-Chemical Company, California, makes amyl xanthate, butyl xanthate, potassium xanthate, and sodium xanthate. In the United States these reagents are used on the gold ores of California and Colorado and in Canada on the gold ores and sulphides of Ontario and Quebec.

Flotation reagents of the Naval Stores Division of the Hercules Powder Company are as follows: Yarmor F pine oil, a frother for floating simple and complex ores; Risor pine oil, for recovering sulphides by bulk flotation; Tarol a toughener of froth, generally used in small amount with Yarmor F, but with some semioxidized ores where high recovery is essential yet the grade of concentrate not so important, Tarol does good work; Tarol a frother for floating certain oxide minerals, but it can be used in selective flotation of sulphide minerals and in bulk flotation where tough frothis desirable; Solvenol, for the floating of graphite in conjunction with Yarmor F.

The statement has come to the attention of the American Cyanamid Company that organic flotation reagents, such as xanthates, even in the small amounts used in flotation, cause reprecipitation of gold from pregnant cyanide solutions. The ore-dressing laboratory of this company is studying the question, and preliminary results indicate that this statement is unfounded. The addition of xanthate, in the amount usually found in flotation circuits, does not precipitate gold from a pregnant cyanide solution containing the normal amount of cyanide and lime.

Valueless slime, in addition to its detrimental effect in coating gold-bearing sulphide, thereby limiting or preventing its flotation, also becomes mixed with the flotation concentrate and lowers its value. Sometimes the problem in flotation is that, although the gold is floatable, the concentrate product is of too low grade. Talc, slate, clay, oxides of iron, and manganese or carbonaceousmatter in ores early form slime in a mill, without fine crushing. Such primary slime, according to E. S. Leaver and J. A. Woolf of the U.S. Bureau of Mines, interferes with the proper selectivity of the associated minerals and causes slime interference. The tendency of primary slime is to float readily or to remain in suspension and be carried over into the concentrate. Preliminary removal and washing of this primary slime before fine crushing is one method of dealing with it. At the Idaho-Maryland mill, Grass Valley, Calif., starch is regularly used as a depressant during flotation. Flotation tests using starch were made on a quartz ore containing carbonaceous schist from the Argonaut mine, Jackson, Calif.; a talcose ore from the Idaho-Maryland mine mentioned; a talcose-clayey ore from Gold Range, Nev.; a siliceous, iron and manganese oxide ore from the Baboquivari district, Nevada; carbonaceous and aluminous slime from the Mother Lode and some synthetic ores. The conclusions from the foregoing tests were in part as follows:

It acts first on the slime; then, if a sufficient excess of starch is present, it will cause some depression of sulphides and metallic gold, either by wetting out or by producing an extremely brittle froth. Therefore, care must be taken in regulating the amount of starch added to obtain the maximum depression of the slime commensurate with high recovery of the gold. In this, as in all other phases of flotation, each ore presents an individual problem and must be so studied.

It wasdescribe by the use of 600 series of flotation reagents which were developed primarily for the purpose of depressing carbonaceous and siliceous slimes in the flotation of gold ores. Carbonaceous material not only greatly increases the bulk and moisture content of a flotation concentrate, but its presence makes cyanidation of the concentrate difficult or impossible owing to reprecipitation of the gold during treatment.

In the treatment of an auriferous sulphide ore associated with carbonaceous shale from South Africa, up to 77 per cent of the carbon was eliminated by the use of 1 lb. per ton of reagent 637 with a 90.5 per cent gold recovery at 20.4:1 ratio of concentration.

A gold carbonaceous sulphide ore from California carrying free gold yielded a 93 per cent recovery into a concentrate at 14.4:1 to ratio of concentration after conditioning with 0.50 lb. per ton of reagent 645.

In each case the ore was ground to about 70 per cent minus 200 mesh and conditioned at 22 per cent solids with the reagents as indicated. Flotation reagents included reagents 301 and 208 and pine oil. In the second case some soda ash and copper sulphate where also used.

It is obvious that the most suitable treatment for ores carrying gold and silver associated with pyrite and other iron sulphides, arsenopyrite or stibnite, will depend on the type of association. Cyanidation is usually the most suitable process, but it often necessitates grinding ore to a fine size to release the gold and silver. Where it is possible to obtain a good recovery by flotation in a concentrate carrying most of the pyrite or other sulphides, it is often more economical to adopt this method, regrinding only the comparatively small bulk of concentrate prior to the leaching operation.

That the trend over the last 10 years has been in this direction will be noted from the numerous examples of such flow sheets in Canada and Australia (see Chap. XV). A number of plants formerly using all-cyanidation have converted to the combined process.

The suitability of the method involving fine grinding and flotation with treatment of the concentrate and rejection of the remainder should receive careful study in the laboratory and in a pilot plant. Mclntyre-Porcupine ran a 150-ton plant for a year before deciding to build its 2400-ton mill. Comparative figures given by J. J. Denny in E. and M. J., November, 1933, on the results obtained by the all-sliming, C.C.D. process formerly used and the later combination of flotation and concentrate treatment showed a saving of 12.1 cents per ton in treatment cost and a decrease of 15 cents per ton in the residue, a total of 27.1 cents per ton in favor of the new treatment.

Flotation may also prove to be the more economical process for the ore containing such minerals as stibnite, copper-bearing sulphides, tellurides,and others which require roasting before cyanidation, because this reduces the tonnage passing through the furnace.

Even when recovery of gold and silver from such ores by flotation is low, it may be advantageous still to float off the minerals that interfere with cyanidation, roasting, and leaching or possibly to smelt the concentrate for extraction of its precious metals. Cyanidation of the flotation tailing follows, this being simpler and cheaper because of prior removal of the cyanicides.

It is a good practice to recover as much of the gold and silver as possible in the grinding circuit by amalgamation, corduroy strakes, or other gravity means to prevent their accumulation in the classifier; otherwise gold that is too coarse to float may escape from the grinding section into the flotation circuit where it will pass into the tailing and be lost.

To prevent this, several companies including the Mclntyre-Porcupine at Timmins, Ontario, have inserted a combination of flotation cell and hydraulic cone in their tube-mill classifier circuits. At the Mclntyre- Porcupine, according to J. J. Denny in E. and M. J., November, 1933, this cell is a 500 Sub-A type. The total pulp discharged from each tube mill passes through 4-meshscreens which are attached to the end of the mills. The undersize goes to the flotation cell, and the oversize to the classifiers. Tailing from the cell flows to the classifiers, and the flotation concentrate joins the concentrate stream from .the main flotation circuit. The purpose of the hydraulic attachment is to remove gold that is too coarse to float, thus avoiding an accumulation in the tube-mill circuit. The cones have increased recovery from 60 to 75 per cent. Every 24 hr. the tube-mill discharge is diverted to the classifiers. Water is added for 15 min. to separate the gangue in the cells from the high-grade concentrate, after which a product consisting of sulphides and coarse gold is removed through a 4-in. plug valve equipped with a locking device. Each day approximately 400 lb. of material worth $2000 to $3000 is recovered. This is transferred to a tube mill in the cyanide circuit,with no evident increase in the value of the cyanide residue. The object of this arrangement is, of course, primarily to deplete the circulating load of an accumulation of free gold and heavy sulphides.

Flotation is used to recover residual gold-bearing sulphides and tellurides. The Lake Shore mill retreatment plant is an interesting example of this technique. The problem here was, of course, to overcome by chemical treatment the depressing action of the alkaline cyanide circuit on the sulphides. A full discussion of this and of the somewhat controversial subject as to whether flotation should in such an instance be carried out before, or after cyanidation will be found in J. E. Williamsons paper Roasting and Flotation Practice in the Lake Shore Mines Sulphide Treatment Plant elsewhere referred to. Summing up the specific considerations governing the choice oftreatment, the author says:

Incidental matters that influenced the choice of treatment scheme included the realization that preliminary flotation would have involved two separate treatment circuits with additional steps of thickening and filtration following the flotation. Furthermore, in the conditioning method evolved, as much as 60 per cent of the dissolved values in the cyanide tailings were precipitated and recovered.

There are, however, cases where flotation equipment was put in for the purpose of recovering the gold in a concentrate and rejecting the tailing only to find that the tailing was too valuable to waste and had finally to be cyanided before discarding.

It is generally true that cyanidation is capable of producing a tailing of lower gold content than flotation. At a price of $35 per ounce for gold this fact is of much greater importance than when gold was valued at $20.67 per ounce. The possible gold loss in the residue to be discarded will influence the choice of a method of treatment.

manganese mining solution - mineral processing

Manganese is widely distributed in nature, and almost all kinds of ores and silicate rocks contain manganese. In modern industry, manganese and its compounds are widely used in various economic fields, of which the iron and steel industry is one of the most important fields. The amount of manganese used is as high as 90%-95%, which is mainly used as a deoxidizer and desulfurizer for iron and steelmaking.

Manganese oxide oreManganese oxide ore is mainly composed of secondary manganese oxide ore of weathered deposits, in addition to some primary and secondary manganese oxide ore of sedimentary and hydrothermal deposits. The manganese minerals in the manganese oxide ore are mainly dolomite, pyrolusite and hydromanganese ore; the gangue minerals are mainly silicate and carbonate minerals, often accompanied by iron, phosphorus and nickel, cobalt and other components.

Manganese carbonate oreThe manganese minerals in sedimentary manganese carbonate ore mainly include rhodochrosite, calcium rhodochrosite, manganese-containing calcite and rhodochrosite; gangue minerals include silicate and carbonate minerals, often accompanied by impurities such as sulfur and iron. The ore is generally more complex, and the particle size of the manganese mineral inlay is as fine as micrometers, which is not easy to dissociate, and it is often difficult to obtain a higher concentrate grade.

Because most manganese ores are fine-grained or fine-grained, and there are a considerable number of high-phosphorus ores, high-iron ores and symbiotic (associated) beneficial metals, it is very difficult to classify. At present, the commonly used manganese ore beneficiation methods include physical beneficiation (washing and screening method, gravity separation method, strong magnetic separation method, flotation method, combined beneficiation method), chemical beneficiation (leaching method) and special beneficiation (fire method enrichment method) ).

Ore washing mainly uses mechanical scrubbing machine to separate the ore from the mud. Commonly used equipment includes ore washing sieve, cylindrical ore washing machine and trough ore washing machine. Usually, the ore washing operation is accompanied by the sieving operation. Directly flush the water on the vibrating screen or send the ore (net ore) obtained by the ore washing machine to the vibrating screen for screening. Screening can be used as an independent part to separate products of different particle sizes and grades for different uses.

At present, the gravity separation method is only suitable for sorting manganese ore with a simple structure and coarser particle size, especially manganese oxide ore with a higher density. Commonly used gravity separation methods include heavy-medium beneficiation, jig beneficiation and shaker beneficiation.The beneficiation process of manganese oxide ore is generally to crush the ore to 6-0mm or 10-0mm, and then to classify, coarse grade particles are sent to jig sorting, and fine grade particles are sent to shaker for sorting.

Manganese minerals are weak magnetic minerals (specific magnetization coefficient X=1010-6~60010-6cm3/g), can be effectively recovered in a strong magnetic field magnetic separator with a magnetic field strength of Ho=800-1600kA/m (10000-20000oe), and the grade of manganese can generally be increased by 4-10%.Because the magnetic separation method has the characteristics of simple operation, easy control, and strong adaptability, it is widely used in the selection of various manganese ores, and various new coarse, medium, and fine-grained strong magnetic machines have also been successfully developed.

The strong magnetic-flotation method has good adaptability. The strong magnetic separator not only effectively removes the slime, but also improves the selection grade of flotation. Strong magnetic-flotation desulfurization can directly obtain comprehensive manganese concentrate products.Sodium petroleum sulfonate instead of oxidized paraffin soap as collector can make the ore pulp sort at neutral and normal temperature, saving medicine consumption and energy consumption.

Generally, manganese ore leaching methods include direct leaching, roasting leaching and biological leaching. Among them, the direct leaching method includes the hydrosulfite method, sulfur dioxide method, ferrous sulfate method and so on.Taking the leaching method of sulfur dioxide for manganese as an example, the manganese ore is slurried, and sulfur dioxide gas is introduced, and the manganese oxide in the ore is converted into MnSO4 and MnS2O6. Lime milk is added to the filtrate to produce manganese hydroxide precipitation, and solid manganese hydroxide is obtained after filtration. This method is suitable for processing low-grade, inlaid fine-grained manganese oxide ores.

The above are common manganese ore beneficiation methods. In actual production, most of the manganese carbonate ore beneficiation methods use strong magnetic separation, heavy medium beneficiation method and flotation method.The manganese oxide ore is mainly adopts gravity separation method, and the ore washing-heavy separation-reduction roasting-magnetic separation-heavy separation process flow is mostly used. Of course, it is often necessary to combine two or more beneficiation methods for refractory manganese ore.

manganese mining process | manganese mining | mining machine price

Manganese ore beneficiation method The types of manganese ore can be basically divided into manganese oxide ore, manganese carbonate ore, polymetallic manganese ore, etc. Therefore, manganese dressing equipment is also diverse. Manganese ore is generally sorted by gravity separation beneficiation method. Manganese ore with finer and more uniform grain size can be improved by strong magnetic separation or flotation. The following is a brief introduction to the ore dressing equipment of manganese ore mining process.

Manganese gravity separation process flow: the raw ore enters the silo, is broken into a rough jaw crusher through a belt conveyor, and then enters the fine crusher for secondary crushing. After two crushed ores, the ore is basically free of large stones. The vibrating screen is screened. The crushed ore is divided into two grades of 0-8mm and 8-30mm. The coarse ore larger than 30mm is returned to the crusher for crushing. 0-8mm grade manganese ore is fed into the 2LTC6109/8T jig for gravity sorting, and 8-30mm grade manganese ore enters the AM30 jig for re-election, respectively obtaining 0-8mm grade manganese concentrate and 8 -30mm grade manganese concentrate.

The manganese ore magnetic separator produced by the Shicheng County Mining Machinery Plant in Jiangxi Province is a dry type strong magnetic separator, which uses high-quality NdFeB. The magnetic field strength of the strong magnetic roller made of the material is up to 15000 Gauss, which can effectively sort a variety of weak magnetic minerals such as hematite, limonite, mirror iron ore, manganese ore and garnet. Manganese ore magnetic separator is mainly used for magnetic beneficiation of minerals such as medium-sized, fine-grained manganese oxide ore and manganese carbonate ore mining process. It has the advantages of high efficiency, energy saving, environmental protection, dry beneficiation and waterless operation.

The specific gravity difference between manganese and waste rock in manganese oxide ore is large. The method of gravity beneficiation can carry out an efficient sorting operation for most manganese oxide ore. The main gravity separator equipment is the jig machine. The manganese mine jig separator produced by Shicheng County Mining Machinery Factory in Jiangxi Province has various models for customers to choose. It can efficiently jig ore dressing of 0-50mm manganese oxide ore with excellent ore dressing effect. Manganese ore jig is mainly used for manganese ore beneficiation of coarse, medium and fine grain inlays. It has the advantages of high efficiency, energy saving and environmental protection.

Manganese ore can also be sorted by the flotation method. The manganese ore flotation machine is mainly used for the flotation of manganese carbonate ore and polymetallic manganese ore, and is suitable for ore sorting of fine-grained inlays. There are many types of manganese ore mining process methods and manganese ore beneficiation equipment. According to different mineral properties, different beneficiation processes and settings can be used to obtain better beneficiation indexes. The specific process is also commonly used in washing machines, vibration. Auxiliary equipment such as a sieve, ball mill, crusher, electromagnetic vibrating feeder.

Mining Equipment Manufacturers, Our Main Products: Gold Trommel, Gold Wash Plant, Dense Media Separation System, CIP, CIL, Ball Mill, Trommel Scrubber, Shaker Table, Jig Concentrator, Spiral Separator, Slurry Pump, Trommel Screen.