shaker table testing for generator sets

long stroke shaker vibration table testing equipment for automotive test

Long Stroke Shaker Vibration Table Testing Equipment For Automotive Test Specifications: Shaker Specifications VG6000-100 Shaker Sine (Pk) 6000Kg.f (60kN) Random (RMS) 6000Kg.f (60kN) Shock (Pk) 12000Kg.f (120kN) Usable Frequency 5 - 2400 Hz Maximum Displacement (p-p) 101mm (4) intermittence 75mm (3) continuous Maximum velocity 1.9m/s Maximum acceleration 86G (842 m/s2) Fundamental Resonance Frequency (Bare table) 2,100 Hz (nom.) +/- 5% Vertical Load Support 1000 kg Body Suspension Natural Frequency (Thrust Axis) Less than 2.5 Hz Diameter of armature 450 mm Armature Effective Nominal Weight 70kg Load Attachment Points (Standard) 17 stainless steel M10 Inserts Stray Flux Density < 1 .0mT (10 gauss) Allowable eccentric moment 300N.m Overall Dimensions 1680mmL1170mmD 1300mmH Weight of Shaker (Uncrated) About 4600Kg SP701 Power Amplifier Rated Output Capacity 72KVA Output voltage 110V Output current 654A Amplifier efficiency Greater than 90% Switching frequency 116KHz Signal to noise ratio Greater than 65 dB Signal to Noise Ratio 70dB Amplifier dimension 920mm620mm2005mm EV340-EV450 Model EV340 EV350 EV420 EV430 EV440 EV450 Vibration Generator VG4000/76 VG5000/76 VG2000/100 VG3000/100 VG4000/100 VG5000/100 Frequency(Hz) 2-2500 2-2500 2-3000 2-2500 2-2500 2-2500 Max Exiting Force(kg.f) 4000 5000 2000 3200 4000 5000 Max. Displacement (mmp-p) 76 76 100 100 100 100 Max. Acceleration(g) 80 100 90 71 66 71 Max. Velocity(cm/s) 200 200 200 250 250 250 Payload(kg) 1000 1000 500 500 800 1000 Armature Mass(kg) 50 50 23 45 60 70 Armature Diameter(mm) 440 440 320 400 445 445 Cooling Method Forced Air Cooling Vibration Generator Weight(kg) 3500 3800 2000 3200 4200 4500 Vibration Generator Dimension L*W*H(MM) 1100*1300*1520 1100*1300*1520 850*1000*1100 1100*1300*1440 1100*1300*1520 1100*1300*1520 Power Amplifier Amp55k Amp70k Amp25k Amp40k Amp60k Amp70k Cooling Method Forced Air Cooling Power Amplifier Weight(kg) 800 900 550 600 800 900 Power Amplifier Dimension L*W*H(MM) 800*550*1920 800*550*1920 800*550*1920 800*550*1920 800*550*1920 800*550*1920 Utility Requirements 3-phase AC380V 10% 50Hz Aggregate Capacity(KW) 80 90 45 64 85 85 Vibration Test Equipmentservices: Presales Technical consultation: test method, laboratory planning and suggestion. Equipment selection: selection scheme, FAQ. Product testing scheme. In-Sales Customer communication and progress report. Guidance for pre-installation preparation, equipment commissioning and test run. Calibration (when Third Partys verification is required). After-Sales Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting. Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information. Technical support: special paid services are provided according to customers needs. Detalied Pictures:

mechanical shock and battery vibration table testing equipment for military industry

Vibration Shaker Table Systems for Shock and Vibration Battery Testing Solutions Shock and Vibration testing standards : MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc. Shock and Vibration Testing MachineApplicable Industries: Automotive, Electronics, Aviation, Vessel, Telecommunication, Military Industry, Measuring Instrument etc. Shock and Vibration Testing MachineWorking Principle: Shock and Vibration Testing MachineSpecifications: EV103-EV220 Model EV103 EV203 EV106 EV206 EV210 EV220 Vibration Generator VG300/25 VG300/40 VG600/25 VG300/50 VG1000/50 VG2000/50 Frequency(Hz) 2-4000 2-2500 2-3000 2-3000 2-3000 2-2500 Max Exiting Force(kg.f) 300 300 600 600 1000 2000 Max. Displacement (mmp-p) 25 38 25 50 50 50 Max. Acceleration(g) 100 100 100 100 100 100 Max. Velocity(cm/s) 200 120 180 200 200 200 Payload(kg) 110 120 200 200 300 400 Armature Mass(kg) 3 3 6 6 10 20 Armature Diameter(mm) 150 150 200 200 240 320 Cooling Method Forced Air Cooling Vibration Generator Weight(kg) 460 460 720 920 1100 1600 Vibration Generator Dimension L*W*H(MM) 750*560*670 750*555*670 800*600*710 800*600*710 845*685*840 1200*870*1100 Power Amplifier Amp3k Amp3k Amp6k Amp6k Amp12k Amp22k Cooling Method Forced Air Cooling Power Amplifier Weight(kg) 250 250 320 320 350 500 Power Amplifier Dimension L*W*H(MM) 800*550*1250 800*550*1250 800*550*1250 800*550*1250 800*550*1520 800*550*1520 Utility Requirements 3-phase AC380V 10% 50Hz Aggregate Capacity(KW) 8 9 18 20 25 35 Shock and Vibration Battery Testing Solutions Batteries power many of the things that enable and fulfill our everyday lives. As our lives have become less tethered devices have surely become more efficient but also batteries now provide higher energy densities. Think for a moment about shipping all these batteriesIn very real terms a shipment can represent a huge energy density and in a mishap that energy could be released in a very undesirable way. Most batteries undergo transportation simulation tests to comply with international shipping standards. This is especially true for lithium ion batteries. To ensure safety during shipment, lithium batteries must be tested per UN/DOT specifications. The UN Manual of Tests and Criteria section 38.3 (UN/DOT 38.3) outlines the tests for lithium batteries. Labtone has the Test Equipment and expertise to perform (UN/DOT 38.3) testsT3 (Vibration), T4 (Shock), and T6 (Impact). Transport hazards are not the only dynamic conditions that battery designs must survive. When a portable electronic device sheds it packaging upon receipt, you may find the everyday use environment to be more rigorous than the shipping environment. In an automotive electric / hybrid application, batteries will be exposed to endless vibration as a matter of course. A variety of industry specifications exist for testing batteries to ensure that they can stand up to this type of use: IEC 62133 (Vibration, Drop, Shock) SAE J2464 (Shock, Drop, Data Acquisition) UL 2054 (Shock, Vibration) UL 2202 (Vibration, Drop) UL 2231 (Drop, Shock, Vibration) Company profile Labtone Test Equipment Co., Ltd. is a +15 year China manufacture of reliable, cost-effective equipments. Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Systems, Drop Tester, Packaging Transportation Simulators, and Combined Environmental Test Chambers. Labtone started business in 2002 in a plant located in Shenzhen and moved to our new, expanded 6,000 square meter facility in Dongguan, Guangdong in 2015. Today, our products are found around the world in electronics, automotive, aerospace, telecommunication, optoelectronics instrument and industrial machinery applications. Our experience and commitment to new product development has resulted in products that are easy to use, accurate and designed for decades of service. Labtone products carry a one-year(12months) warranty. We provide comprehensive factory services and supports, technical literatures, manuals and guides as well as having qualified staffs and experts to solve your problems. We sincerely invite you to visit our factory. shock and vibration testing services: Presales Technical consultation: test method, laboratory planning and suggestion. Equipment selection: selection scheme, FAQ. Product testing scheme. In-Sales Customer communication and progress report. Guidance for pre-installation preparation, equipment commissioning and test run. Calibration (when Third Partys verification is required). After-Sales Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting. Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information. Technical support: special paid services are provided according to customers needs. Detalied Pictures:

Batteries power many of the things that enable and fulfill our everyday lives. As our lives have become less tethered devices have surely become more efficient but also batteries now provide higher energy densities.

Most batteries undergo transportation simulation tests to comply with international shipping standards. This is especially true for lithium ion batteries. To ensure safety during shipment, lithium batteries must be tested per UN/DOT specifications. The UN Manual of Tests and Criteria section 38.3 (UN/DOT 38.3) outlines the tests for lithium batteries. Labtone has the Test Equipment and expertise to perform (UN/DOT 38.3) testsT3 (Vibration), T4 (Shock), and T6 (Impact).

Transport hazards are not the only dynamic conditions that battery designs must survive. When a portable electronic device sheds it packaging upon receipt, you may find the everyday use environment to be more rigorous than the shipping environment. In an automotive electric / hybrid application, batteries will be exposed to endless vibration as a matter of course. A variety of industry specifications exist for testing batteries to ensure that they can stand up to this type of use:

Labtone Test Equipment Co., Ltd. is a +15 year China manufacture of reliable, cost-effective equipments. Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Systems, Drop Tester, Packaging Transportation Simulators, and Combined Environmental Test Chambers.

Labtone started business in 2002 in a plant located in Shenzhen and moved to our new, expanded 6,000 square meter facility in Dongguan, Guangdong in 2015. Today, our products are found around the world in electronics, automotive, aerospace, telecommunication, optoelectronics instrument and industrial machinery applications. Our experience and commitment to new product development has resulted in products that are easy to use, accurate and designed for decades of service.

Labtone products carry a one-year(12months) warranty. We provide comprehensive factory services and supports, technical literatures, manuals and guides as well as having qualified staffs and experts to solve your problems.

vibration exciter mini vibration shaker table for experimental modal analysis

Vibration Exciter ,Mini Vibration Shaker Table For Experimental Modal Analysis ET series standard vibration table with light weight, small volume, convenient to move, is widely used in the acceleration sensor calibration, the tiny parts of resistance to vibration test, fatigue test and mechanical impedance test. At the same time, the ET series can also be used for teaching and scientific research and laboratory. A small exciter capable of delivering peak sine forces up to 500 N (50kg.f). Used for vibration testing of small articles and for experimental modal analysis. Features Apply to high precision vibration meter calibration, mechanical impedance test, vibration analysis of the vibration source Apply to various of sensor, electronic, electric machines and other small lightweight vibration test . Apply to the basic test of vibration engineering education equipment, etc. Compose of vibration generator, power amplifier, vibration controller, signal generator, acceleration sensor. Specifications Model ET50 Rated Sine Force 50kg.f(490N) Rated Random Force 40kg.f(392N) Frequency Rang 5---3800Hz Max. Acceleration 50G Max. Displacement 12mm Max. Velocity 1.2m/s Armature Weight 1kg Machine dimension W360*D300*H350mm Machine Weight 36kg Cooling Method Forced Cooling Power Amplifier VA05 Output Power 500W Output Voltage 12VRMS, Frequency Rang 17KHz Power Supply AC220V10% 50Hz Company Profile: Labtone Test Equipment Co., Ltd. is a +15 year China manufacture of reliable, cost-effective equipments. Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Systems, Drop Tester, Packaging Transportation Simulators, and Combined Environmental Test Chambers. Labtone started business in 2002 in a plant located in Shenzhen and moved to our new, expanded 6,000 square meter facility in Dongguan, Guangdong in 2015. Today, our products are found around the world in electronics, automotive, aerospace, telecommunication, optoelectronics instrument and industrial machinery applications. Our experience and commitment to new product development has resulted in products that are easy to use, accurate and designed for decades of service. Labtone products carry a one-year(12months) warranty. We provide comprehensive factory services and supports, technical literatures, manuals and guides as well as having qualified staffs and experts to solve your problems. We sincerely invite you to visit our factory. Customer Services Presales: Technical consultation: test method, laboratory planning and suggestion. Equipment selection: selection scheme, FAQ. Product testing scheme. In-Sales: Customer communication and progress report. Guidance for pre-installation preparation, equipment commissioning and test run. Calibration (when Third Partys verification is required). After-Sales: Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting. Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information. Technical support: special paid services are provided according to customers needs.

ET series standard vibration table with light weight, small volume, convenient to move, is widely used in the acceleration sensor calibration, the tiny parts of resistance to vibration test, fatigue test and mechanical impedance test. At the same time, the ET series can also be used for teaching and scientific research and laboratory.

Labtone Test Equipment Co., Ltd. is a +15 year China manufacture of reliable, cost-effective equipments. Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Systems, Drop Tester, Packaging Transportation Simulators, and Combined Environmental Test Chambers.

Labtone started business in 2002 in a plant located in Shenzhen and moved to our new, expanded 6,000 square meter facility in Dongguan, Guangdong in 2015. Today, our products are found around the world in electronics, automotive, aerospace, telecommunication, optoelectronics instrument and industrial machinery applications. Our experience and commitment to new product development has resulted in products that are easy to use, accurate and designed for decades of service.

Labtone products carry a one-year(12months) warranty. We provide comprehensive factory services and supports, technical literatures, manuals and guides as well as having qualified staffs and experts to solve your problems.

genset vibration testing | itm

Measuring vibration levels at strategic locations on a GENSETs structure is a common method for determining its condition/health. Operators typically acquire baseline vibration measurements after the initial installation and then periodically collect vibration data sets to see if the vibration levels have changed. By monitoring the vibration levels and spectra, vibration analysts can determine when maintenance is required.

In general, operators implement one of three types of vibration monitoring plans. Which plan is implemented depends on manpower availability and the funding available for sensors, hardware and infrastructure. This table lists the three vibration monitoring plans and the pros and cons associated with each plan.

ITM provides software development, structural and mechanical testing services, industrial monitoring, strain gauging, and data analysis solutions to clients on six continents. ITM is a recognized National Instruments Gold Alliance Partner.

3-axis vibration test systems, shaker table for automotive parts road simulation

3-Axis Vibration Test Systems, Shaker Table For Automotive Parts Road Simulation Introduction Vibration test is a process of exciting or shocking some part or device to observe its reaction in real environment. Vibration test is widely applied in many fields, ranging from circuit board, airplane, ship, rocket, missile, automobile, household appliance and other industrial products. Labtone can offer you the whole vibration and testing proposal, and provide you with the quality certificates of products according to national and international standards, including GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM standards. Technical Parameters for EV203 Parameters of VG300-40 electrodynamic shaker Max. sine exciting force 300Kg.f peak (3KN) Max. random exciting force 300Kg.f r.ms (3KN) Max. shock exciting force 600Kg.f peak (6KN) Frequency range 22500Hz Max. displacement 38 mm p-p Max. velocity 1.8m/s Max. acceleration 100G (980 m/s2) Max. load (sine) F=M.A 5G (49 m/s2) 10G (98 m/s2) 20G (196 m/s2) 30G (294 m/s2) 57kg 27kg 12kg 7kg Effective load 120 kg Vibration isolation frequency 2.5 Hz Diameter of armature 150 mm Mass of armature 3kg Table screw 13M8 Flux leakage 10gauss Allowable eccentric moment 300N.m Shaker dimensions 800565670 mm Weight About 480Kg Amp3K digital switch power amplifier Output power 4KVA Output voltage 100V Output current 30A Amplifier efficiency 90% Switching frequency 116KHz Signal to noise ratio 65dB Noise 70dB Amplifier dimension 880 590 1125 mm Servo protection system Functions: Temperature, air pressure, over-displacement, over-voltage, over-current, input under-voltage, external fault, control power supply, logic fault, input phase loss, etc. Digital vibration controller Hardware configuration: 2-channel input, 1-channel output Control computer 1 set Features: Strength of the suspension system and linear motion guiding, strong carrying capacity, good guiding functions, high stability. Perfect performance on amplitude variation. High efficient on D Class power conversion, 3 - Sigma peak current, provide the optimization of power consumption and minimum harmonic distortion. Rapid self-test diagnostics and chain safeguard, high high safety and reliability Air gasbag isolation damping device realize the the vibration table with no need for special foundation. Perfect reappearance vibration waveform and the reduction of vibration transmission Different application on the vertical and horizontal tables. Simple operation for the controller. Working Principle: Specifications: EV203-EV220 Model EV203 EV206 EV210 EV220 Vibration Generator VG300/40 VG300/50 VG1000/50 VG2000/50 Frequency(Hz) 2-2500 2-3000 2-3000 2-2500 Max Exiting Force(kg.f) 300 600 1000 2000 Max. Displacement (mmp-p) 38 50 50 50 Max. Acceleration(g) 100 100 100 100 Max. Velocity(cm/s) 120 200 200 200 Payload(kg) 120 200 300 400 Armature Mass(kg) 3 6 10 20 Armature Diameter(mm) 150 200 240 320 Cooling Method Forced Air Cooling Vibration Generator Weight(kg) 460 920 1100 1600 Vibration Generator Dimension L*W*H(MM) 750*555*670 800*600*710 845*685*840 1200*870*1100 Power Amplifier Amp3k Amp6k Amp12k Amp22k Cooling Method Forced Air Cooling Power Amplifier Weight(kg) 250 320 350 500 Power Amplifier Dimension L*W*H(MM) 800*550*1250 800*550*1250 800*550*1520 800*550*1520 Utility Requirements 3-phase AC380V 10% 50Hz Aggregate Capacity(KW) 9 20 25 35 Customer Services Presales: Technical consultation: test method, laboratory planning and suggestion. Equipment selection: selection scheme, FAQ. Product testing scheme. In-Sales: Customer communication and progress report. Guidance for pre-installation preparation, equipment commissioning and test run. Calibration (when Third Partys verification is required). After-Sales: Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting. Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information. Technical support: special paid services are provided according to customers needs. Detailed Pictures:

Vibration test is a process of exciting or shocking some part or device to observe its reaction in real environment. Vibration test is widely applied in many fields, ranging from circuit board, airplane, ship, rocket, missile, automobile, household appliance and other industrial products.

Labtone can offer you the whole vibration and testing proposal, and provide you with the quality certificates of products according to national and international standards, including GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM standards.

ac156 seismic certification - shake table testing for seismic applications

The most realistic way to determine if a component will withstand an earthquake and remain functionalis to put it through one.In accordance with the code, active or energized components are required to be certified exclusively through shake table testing or experience data. TRU Compliance is regularly engaged inshake table testing on systems of all sizes, whether smallcomponents weighing 20 lbs orlarge, complex systems in excess of 100,000 lbs.

The most common testing procedure used for IBC and OSHPD applications is the International Code Council Evaluation Services Acceptance Criteria 156 (ICC-ES AC156).This criteria specifies a specific input motion to which nonstructural components should be subjected.

Input motions are required to be 30 seconds in length with a stationary input motion over a broad range of frequencies. This input motion requirement is derived based on ASCE design provisions. Required response spectrum shape is derived based on building code provisions.

TRU Compliance maintains a network of partner and affiliate shake table testing labs throughout the US to serve our clients needs and schedules. There are a variety of type of shake tables appropriate for use in a seismic certification program. Manyfactors are involved in determining the most appropriate testing location, such as: size and weight of the component, facility location, timeline and complexity of the program.

Tri-axialtables provide the most realisticseismic simulation as they are capable of generating seismic motions in all three orthogonal directions simultaneously. By using a tri-axial table, the amount of time required at the test lab is minimized, as the number of seismic runs and setup is the lowest.

Unlike a tri-axial table, uni-axial facilities are capable of shake table testing in one direction at a time. While there are uni-axial facilities that can test larger components, TRU Compliance utilizes these types of facilities for smaller components only. These testing locations are most utilized for testing control panels and similar devices, due to their cost competitiveness on test articles of this size. When using a uni-axial table, the duration on site is typically longer as more setup time and seismic runs are required.

Often times, the size or configuration of a test article requires the design and fabrication of testing fixtures to accommodate seismic testing. TRU Compliance has extensive experience in the design and fabrication of fixtures for use in shake table testing and has a wide variety of standard fixtures on site at our partner labs. Whether it is a vibration isolation frame, ceiling suspension system or wall mount panel, TRU has the expertise to provide cost effective, high performance assemblies.

& shaker table vibration testing machine

Vibration Shaker Testing Equipmentis widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude. Equipment through continuous failure to run 3 months of testing, stable performance, reliable quality.

Characteristics: Ultra mute work; The machine base uses the high quality material, installs conveniently, the operation is smooth, does not need to install the The, the control circuit digitization control and the display frequency, the PID adjusts the function, causes the equipment work to be more stable, reliable, sweeps the frequency and the fixed frequency operation way, adapts to the different profession test request To solve the interference of the strong electromagnetic field to the control circuit, and to increase the working time set, so that the test product reaches the accurate test time.

9. the Taiwan body: can not produce the collision sound, the upper and lower center axis mutual touch will cause the spring steel piece rupture to be immediately shut down, amplitude modulation is adjusted small then turns on.

9. the Taiwan body: can not produce the collision sound, the upper and lower center axis mutual touch will cause the spring steel piece rupture to be immediately shut down, amplitude modulation is adjusted small then turns on.

CONTACT PERSON :Mrs. Zhong TEL : +86-0769-8905 5588 E-MAIL :[email protected] PHONE : +86 182 3691 2012 FACTORY ADD: No.13 Daxin Street, DaluoshaIndustrial Zone, Daojiao Town, Dongguan City, Guangdong Province.